Lets see your bumpers - Page 31

The Mud Addict · 03-15-2011, 12:38 AM

made a bumper for my B2. Mounts are 5/16 plate using three 1/2in bolts per side. Is made of 1.5in x .120 wall DOM. The shackle mounts are 1in plate set 3in deep inside of 2x2 1/4 wall square tubing. With a 'lil Warn 8274 for retrieving myself

And the marker lights came off the side of a Grey Hound bus

Am gonna swap my headlights for round ones to match the markers

The Mud Addict · 03-15-2011, 01:00 AM

Also built a back bumper

Has just a 'lil 9 ton shackle for pulling with

Bumper is made of 5/16 thick 6x6, that I chopped into a big piece of angle. Used same material for the frame mounts. The shackle mount 1.5in thick plate that goes through the bumper and is bigger than the hole, so it could never be pulled through

Also has cut outs on outer ends for my Hi-lift, so I don't drop the B2

bilzy7 · 03-16-2011, 02:57 PM

Damn, I want a mix of tank killer bumper and prerunner bumper lol... Cept not too heavy.

bilzy7 · 03-16-2011, 03:02 PM

Quote:

Originally Posted by dugfab

heres mine

Nice bar, but I like your 1 piece front end conversion from fiberwerx better. Can't wait till my truck has what it need to earn that 1 piece front end...

shadow905 · 03-16-2011, 03:35 PM

bilzy7 · 03-16-2011, 03:37 PM

Quote:

Originally Posted by jarhead2010

i know most of you dont like this bumper, but i figured id show it from different angles, i think these pics show it better then the original, but thats imo, im the only one who needs to like it

I think the bumper looks good, better then my no lower valance looks like crap metal bumper... Lol. Anyone in Massachusetts wanna fab me a bumper I can draw up plans really detailed, if not on paper name your software and I'll design it. I'm use to designing computer network layouts for companies. I'll make it look Pretty

894banger · 04-14-2011, 07:48 AM

hey ForOffRoadDriving on that second gen that yopu posted a pic of, if its yours were did you get those clearcorners, i havn't seen those before and i really like them

compaqeo · 04-15-2011, 10:53 PM

My rear bumper on my 84 needs paint.

And my front bumper 1.5x .120 tube

whissiswheelin · 04-21-2011, 07:08 AM

The front bumper I built for my new daily driver.

**ForOffRoadDriving** · 04-21-2011, 02:40 PM

Quote:

Originally Posted by 894banger

hey ForOffRoadDriving on that second gen that yopu posted a pic of, if its yours were did you get those clearcorners, i havn't seen those before and i really like them

i got them on ebay at the same time i bought the headlights, around 05-06?

**ForOffRoadDriving** · 04-21-2011, 02:44 PM

^ damn, thats a zombie assault vehicle bumper! or a dry spot to stand incase of a flood?

**4.0B2** · 04-21-2011, 02:57 PM

more recent of mine, fenders trimmed so no fender hangs down, shackles installed, and lights mounted where they will stay

03-15-2011, 12:38 AM	#361
The Mud Addict Member Join Date: Nov 2010 Location: Bellevue, WA Year: '85 Make: Ford Model: Bronco II Engine: 2.hate LOL! Class: 4x4 Used For: Teasing Jeeps! Posts: 235 Rep Power: 5 iTrader: (0)	made a bumper for my B2. Mounts are 5/16 plate using three 1/2in bolts per side. Is made of 1.5in x .120 wall DOM. The shackle mounts are 1in plate set 3in deep inside of 2x2 1/4 wall square tubing. With a 'lil Warn 8274 for retrieving myself And the marker lights came off the side of a Grey Hound bus Am gonna swap my headlights for round ones to match the markers
	Tweet

03-15-2011, 01:00 AM	#362
The Mud Addict Member Join Date: Nov 2010 Location: Bellevue, WA Year: '85 Make: Ford Model: Bronco II Engine: 2.hate LOL! Class: 4x4 Used For: Teasing Jeeps! Posts: 235 Rep Power: 5 iTrader: (0)	Also built a back bumper Has just a 'lil 9 ton shackle for pulling with Bumper is made of 5/16 thick 6x6, that I chopped into a big piece of angle. Used same material for the frame mounts. The shackle mount 1.5in thick plate that goes through the bumper and is bigger than the hole, so it could never be pulled through Also has cut outs on outer ends for my Hi-lift, so I don't drop the B2
	Tweet

03-16-2011, 02:57 PM	#363
bilzy7 Member Join Date: Sep 2010 Location: Lynn, MA Year: 1998 Make: Ford Model: Explorer Engine: 4.0 SOHC Class: 4x4 Used For: daily driving, fun in the snow Posts: 2,186 Rep Power: 14 iTrader: (0)	Damn, I want a mix of tank killer bumper and prerunner bumper lol... Cept not too heavy. __________________ 1999 Ranger 4.0 4x4 Off Road http://www.therangerstation.com/foru...d.php?t=103611 <--- My Slow Build
	Tweet

03-16-2011, 03:35 PM	#365
shadow905 New Member Join Date: Feb 2008 Location: San Antonio, TX Year: 2001 Make: Ford Model: Ranger Engine: 3.0L V6 Class: 4x4 Used For: everything! Posts: 15 Rep Power: 0 iTrader: (0)
	Tweet

04-14-2011, 07:48 AM	#367
894banger New Member Join Date: Mar 2011 Year: 1989 Make: Ford Model: Ranger Posts: 10 Rep Power: 0 iTrader: (0)	hey ForOffRoadDriving on that second gen that yopu posted a pic of, if its yours were did you get those clearcorners, i havn't seen those before and i really like them
	Tweet

04-15-2011, 10:53 PM	#368
compaqeo Member Join Date: Jul 2008 Location: Vancouver island, Bc, Canada Year: 1984/1988 Make: Ford Model: d-ranged Engine: 2.9l v6 Class: 4x4 Used For: pulling out jeeps Posts: 308 Rep Power: 10 iTrader: (0)	My rear bumper on my 84 needs paint. And my front bumper 1.5x .120 tube __________________ 84 ranger cab on b2 frame with 2.9l, 8inch's of lift with 36x13.50 interco Iroks and a tube bed/exo, Dana 35 and 8.8 link to my truck thread
	Tweet

04-21-2011, 07:08 AM	#369
whissiswheelin Junior Member Join Date: Oct 2010 Location: Mission BC Year: 1990 Make: FORD Model: RANGER Engine: 2.9L Class: 4X4 Used For: Daily Driving and Stave'n Posts: 92 Rep Power: 6 iTrader: (0)	The front bumper I built for my new daily driver.
	Tweet

04-21-2011, 02:44 PM	#371
ForOffRoadDriving WRENCH WERKS Join Date: Aug 2007 Location: HIGHLAND, MICHIGAN Year: 1994 Make: FORD Model: RANGER Engine: 3.0L Class: 2WD OFF ROAD Used For: EVERYTHING A RANGER CAN DO, AND LOTS OF THINGS IT SHOULDN'T Posts: 2,723 Rep Power: 18 iTrader: (0)	^ damn, thats a zombie assault vehicle bumper! or a dry spot to stand incase of a flood? __________________ 1994 Ranger 4X2 Off Road, Built Not Bought! http://www.therangerstation.com/foru...ad.php?t=37621
	Tweet

04-21-2011, 02:57 PM	#372
4.0B2 MALL CRAWLER POST WHORE! Join Date: Sep 2009 Location: Walls, MS Year: 1988 Make: Ford Model: Bronco II Engine: 4.0 v6 Class: 4x4 Used For: Taking my Money Posts: 9,965 Rep Power: 51 iTrader: (4)	more recent of mine, fenders trimmed so no fender hangs down, shackles installed, and lights mounted where they will stay __________________ Daily Driver 88 BII Build Thread: Clicky! Backup Vehicle, 92 2wd Explorer: Clicky! The Collection of Fords: Clicky! http://southernrockracing.com/
	Tweet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode