m5od transmission hyd line

rochhound · 06-03-2012, 12:05 PM

i bought a m50d 5 speed trans im replacing my al4d for manual i cant figure how to disconnect the hyd slave line at trans ive taken the white plastic sleeve of but cant get it to release. i dont like to force things and possibly break it
any help would be appreciated
thanks

**RangerSVT** · 06-03-2012, 12:45 PM

Obtain you a clutch release tool at your local autoparts store, they are very inexpensive and valuable. Once you have the sleeve depressed completely on all 360*, then it will release....

SVT

**adsm08** · 06-03-2012, 06:41 PM

Why did you take the sleeve off? That will make this a bit harder.

Frankly, at this point I'd cut the line and punch the roll pin out. The line isn't that expensive, not at all hard to find, you will need a new slave either way, and it will just save you a bunch of headache.

**AllanD** · 06-06-2012, 12:40 PM

The white plastic sleeve is the release collar if you've removed it put it back in, you push that sleeve IN, not "take it off"

AD

**adsm08** · 06-07-2012, 05:38 PM

Quote:

Originally Posted by AllanD

The white plastic sleeve is the release collar if you've removed it put it back in, you push that sleeve IN, not "take it off"

AD

And yet I've seen a rash of this style post recently.

Read the freaking instructions people.

06-03-2012, 12:05 PM	#1
rochhound Junior Member Join Date: Apr 2010 Year: 1986 Make: ford Model: b II ranger Engine: 4.0 Class: 4x4 Posts: 39 Rep Power: 7 iTrader: (0)	m5od transmission hyd line i bought a m50d 5 speed trans im replacing my al4d for manual i cant figure how to disconnect the hyd slave line at trans ive taken the white plastic sleeve of but cant get it to release. i dont like to force things and possibly break it any help would be appreciated thanks
	Tweet

06-03-2012, 12:45 PM	#2
RangerSVT Oct 09 OTOTM Join Date: Mar 2009 Location: TRS since 2002 - NW TN Year: 1996 Make: Ford Model: Ranger SC 4x4 Engine: GT-40 5.0L EFI W/AC Class: 4x4 EXTREME DD Used For: Anger Management Posts: 5,990 Rep Power: 26 iTrader: (29)	Obtain you a clutch release tool at your local autoparts store, they are very inexpensive and valuable. Once you have the sleeve depressed completely on all 360, then it will release.... SVT __________________ Member of the Turkey Bay Crew* *SVT Build Thread (96 V8 Ranger)* ST Build Thread (02 V8 Sport Trac) *V8 swap Club/Info*
	Tweet

06-06-2012, 12:40 PM	#4
AllanD RBV Technical Advisor Join Date: Jun 2001 Location: East-Central Pennsylvania Year: 1987... sorta Make: Ford Model: Ranger Supercab Engine: '93 4.0 Class: 4x4 Used For: Roadtrip Warrior Posts: 7,169 Rep Power: 47 iTrader: (18)	The white plastic sleeve is the release collar if you've removed it put it back in, you push that sleeve IN, not "take it off" AD __________________ Gun Control - A theory espoused by some monumentally stupid people; who claim to believe, against all logic and common sense, that a violent predator who ignores the laws prohibiting them from robbing, raping, kidnapping, torturing and killing their fellow human beings will obey a law telling them that they cannot own a gun.
	Tweet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode