no guages

CaseyJoe · 03-15-2011, 06:58 PM

hi I have a 1998 ford ranger and I do not have any instruments as in tach, speedo, guages etc. There is no power going to the bottom left fuse which is for the instruments. any ideas anyone

RedRyder97 · 03-20-2011, 11:04 PM

So what your saying is. With a volt meter or test light you pulled no voltage or got no light to come on at the instrument fuse on the drivers side fuse box. With the key on turned clock wise as to start truck. First step is replace the fuse or swap with another of the same amperage. Many have the replacements on the fuse panel their by the door. Second do you have any light in the dash working. can you dim them or make them bright?

03-15-2011, 06:58 PM	#1
CaseyJoe New Member Join Date: Mar 2011 Year: 1998 Make: Ford Model: Ranger Posts: 2 Rep Power: 0 iTrader: (0)	no guages hi I have a 1998 ford ranger and I do not have any instruments as in tach, speedo, guages etc. There is no power going to the bottom left fuse which is for the instruments. any ideas anyone
	Tweet

03-20-2011, 11:04 PM	#2
RedRyder97 New Member Join Date: Jul 2009 Location: SW Michigan Year: 1997 Make: Ford Model: Ranger XLT Engine: 2.3 3;73 rear end 22mpg Class: 2wd street Used For: Everyday Driving Posts: 24 Rep Power: 0 iTrader: (0)	So what your saying is. With a volt meter or test light you pulled no voltage or got no light to come on at the instrument fuse on the drivers side fuse box. With the key on turned clock wise as to start truck. First step is replace the fuse or swap with another of the same amperage. Many have the replacements on the fuse panel their by the door. Second do you have any light in the dash working. can you dim them or make them bright?
	Tweet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode