Front 1st Gen Speakers

85_Ranger4x4 · Aug 4, 2017

Anyone know of good sounding speakers that fit under the speaker grilles?

adsm08 · Aug 4, 2017

I have some sort of not crappy ones. They were the closest thing Crutchfield had but they don't fit quite right because they are for a 4-point mounting rather than a 3 like the original ones. I don't remember who made them, but I've had them for years and they aren't terrible. I am thinking maybe SoundStream.

fangotango306 · Aug 4, 2017

I have some 4" jvc 3ways in my 84 b2 that arent too bad but they do not mount correctly and the magnet hits the plastic duct on the pass side. Ill be replacing soon and mounting them on top of the factory grill.

85_Ranger4x4 · Aug 6, 2017

fangotango306 said:
I have some 4" jvc 3ways in my 84 b2 that arent too bad but they do not mount correctly and the magnet hits the plastic duct on the pass side. Ill be replacing soon and mounting them on top of the factory grill.

LOL, I have had a set of Polks mounted that way for like 15 years.

I get tired of leaves and crap getting stuck in front of them and would love to go back to just plain grilles.

fangotango306 · Aug 8, 2017

I found some marine 3 way speakers that once mounted are only about an 1/8" tall/thick. I may have some original speaker grills layin around if your looking.

fangotango306 · Aug 8, 2017

Ive been considering door speakers but i cant cut up my 100% rust free doors.

85_Ranger4x4 · Aug 9, 2017

I kept the original ones, I plasma cuttered the holes in the ones out of my parts truck. I have a new dash to swap in eventually that has the grilles that came with it too so I am pretty well covered with grills.

I would love something that fits below the grilles so it looks factory. With a loud exhaust, mud tires and no A/C it is more like a motorcycle radio than a sound booth rolling down the highway.

Cutting the grilles out worked but they are not flat so you have gap at one side or the other too. Could get fancy and just cut out a piece of plate but it won't line up with the dash either.

fangotango306 · Aug 9, 2017

I seen what you mean when i looked at mine today. Ill see what i come up with and post it up when finished.

85_Ranger4x4 · Aug 11, 2017

This is what I have now.

fangotango306 · Aug 11, 2017

Those dont look too bad. But they are a bit tall. And i can see how stuff would end up stuck in front.

RangerFabWorks · Aug 12, 2017

Best bet is to mod the mounting points and fit a 5 1/4 speaker in there.

85_Ranger4x4 · Aug 12, 2017

What I have works, I want something that looks stock and sounds better that petrified 30+ yo junkyard speakers.

4.0B2 · Aug 27, 2017

I put some Memphis PR's in the dash of mine but I had to make my own mounts

RayInStl · Aug 27, 2017

I had a set of really cheap Pyle 4" that worked ok. Not much bass, but loud enough and clear. I don't think you'll get much bass in the dash. It's open under the speaker so there's nothing to bounce the bass back up.

Angie · Sep 4, 2017

here is what we built. sounds good. page 3 post 24 on our build... hope this helps.

http://www.therangerstation.com/forums/showpost.php?p=1492951&postcount=24

FYI - Edited the link to go directly to the post.

Front 1st Gen Speakers

Forum Staff Member

Senior Master Grease Monkey

Member

Forum Staff Member

Member

Member

Forum Staff Member

Member

Forum Staff Member

Member

The O.G blackwidow67

Forum Staff Member

Well-Known Member

Member

Well-Known Member

Sponsored Ad

Sponsored Ad

Member & Vendor Upgrades

Truck of The Month

Recently Featured

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store

Sponsored Ad

Sponsored Ad

Sponsored Ad

Amazon Deals