DFracing
Member
- Joined
- Mar 14, 2009
- Messages
- 364
- Reaction score
- 3
- Points
- 18
- Vehicle Year
- 2002
- Make / Model
- ford
- Engine Size
- 4.0
- Transmission
- Automatic
it was originally shuddering upon accel, but once it got above 2k rpms it would go no problem, i put a new coil in it, and cleaned the maf, and air temp sensors. it fixed the issue for about 2 days, now the truck will idle but will not move under load, give it gas even in neutral and it cuts out and dies. Took replacement coil off and put a warrantied item on, same issue. did i ruin the MAF when i cleaned it, or did the new coil blow my plugs and wires. or?