• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

turn signals,reverse lights dont work


fordtrucks4toys

New Member
Joined
Jul 30, 2009
Messages
28
Reaction score
0
Points
0
Location
hawaii
Vehicle Year
1983
Make / Model
ford
Engine Size
2.8
Transmission
Manual
1992 ford explorer, turn signals and reverse lights dont work.bought new flasher, still dont work,bulbs are good, emergency flashers work, but if you mess with the turn signal switch, the pass side light will quit flasing, but the fronts are flashing,

any ideas?
 


detty_motorsports

New Member
Joined
Sep 21, 2009
Messages
285
Reaction score
2
Points
0
Age
38
Location
chillicothe,ohio
Vehicle Year
1988/1992
Make / Model
ford/ford
Engine Size
2.9
Transmission
Automatic
1992 ford explorer, turn signals and reverse lights dont work.bought new flasher, still dont work,bulbs are good, emergency flashers work, but if you mess with the turn signal switch, the pass side light will quit flasing, but the fronts are flashing,

any ideas?
id say its in the switch or it may be a bad ground...... good luck:icon_thumby:
 

trail B2

New Member
Joined
Jan 17, 2009
Messages
1,289
Reaction score
8
Points
0
Location
North Eastern Ca.
Vehicle Year
1986
Make / Model
ford
Engine Size
4.0
Transmission
Manual
Blinkers

You know what I did was change the wrong flasher, the blinker flasher is on top of the fuse panel the emergency flasher is on the bottom, the one you can see my old trick is to feel it with the flasher on to tell witch one but there too close together to tell that way.
 

fordtrucks4toys

New Member
Joined
Jul 30, 2009
Messages
28
Reaction score
0
Points
0
Location
hawaii
Vehicle Year
1983
Make / Model
ford
Engine Size
2.8
Transmission
Manual
i changed the round one , blue in color, plastic case, says its flasher. thats all i changed,all fuses are good, but what are those silver things rectangle shaped fuses? has no diagram on the fuse panel, got no manual for this car.
sold my s10, my ranger 4x4 project is at a hault, so this is my new ride / toy.
if i didnt need to go to work, id just tear the 4.0 from this and transplant it in to my ranger !! but i need a ride, soooo this one gotta stay intact for a while
 

trish

New Member
Joined
May 21, 2010
Messages
27
Reaction score
0
Points
0
Vehicle Year
2000
Make / Model
hummer
Transmission
Automatic
1992 ford explorer, turn signals and reverse lights dont work.bought new flasher, still dont work,bulbs are good, emergency flashers work, but if you mess with the turn signal switch, the pass side light will quit flasing, but the fronts are flashing,

any ideas?
Does the 3rd brake light work? If so it could just be a bulbs at the tail lights. Get a light tester one should light the bulb all the time while the other should light only when the button is pushed. If it does not work this way your switch is bad.
 
Last edited:

Sponsored Ad


Sponsored Ad

Staff online

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Shran
April Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top