Ford460
New Member
- Joined
- Jun 17, 2009
- Messages
- 20
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1990
- Make / Model
- Ford
- Transmission
- Manual
Well I started gathering parts to do a 5.0 swap in my 88 Bronco 2, and have a few wiring questions after hours of research. This is my first swap with fuel injection and this much wiring so bear with me. I bought a motor out of a 97 Explorer and it was already pulled and on a stand. motor still has engine harness on it and came with pretty much every wire out of the explorer. I still need to get wiring diagrams for the explorer and all that but looking at these harnesses I have a few questions that I cannot find the answers to. What appears to be the engine bay harness that plugs into the actual engine harness via the large black connector, seems to have plugs for the body harness with the air bag module and all that as well.. does this all get removed from the engine bay harness? im guessing I don't need anything from the body harness... I have some pics to describe what I am talking about
This picture im guessing is the body harness being it has the airbag module in it
This is the big connector on the body harness that the three large connectors that go in this seem to be on the engine bay harness.
This is what Im guessing would be the engine bay harness that the main engine harness plugs into
And in that harness here are the 3 plugs that corospond with the body harness
so does this harness come apart to get rid of some of this stuff?
here is more of the engine bay harness
and the engine harness
any insight or help would be appreciated! Thank you
This picture im guessing is the body harness being it has the airbag module in it
This is the big connector on the body harness that the three large connectors that go in this seem to be on the engine bay harness.
This is what Im guessing would be the engine bay harness that the main engine harness plugs into
And in that harness here are the 3 plugs that corospond with the body harness
so does this harness come apart to get rid of some of this stuff?
here is more of the engine bay harness
and the engine harness
any insight or help would be appreciated! Thank you