- Joined
- Dec 9, 2011
- Messages
- 360
- Reaction score
- 2
- Points
- 0
- Location
- GR Michigan
- Vehicle Year
- 1989
- Make / Model
- Ford
- Engine Size
- 95' 4.0 OHV
- Transmission
- Manual
yeah its all in place and installed i have my toe in set accordingly
i have the steering locked into place on center
but the springs make the truck want to shift to the drivers side of the axle
so i hooked a ratchet strap to the passenger lower coil mount and the upper coil bucket on the drivers side, but when i tighten it it pulls the drivers side down a little bit, if that makes sense.
the only thing that has occurred to me is to pull the truck at the frame laterally from the passenger, i just need to figure out something to hook on to.
i have the steering locked into place on center
but the springs make the truck want to shift to the drivers side of the axle
so i hooked a ratchet strap to the passenger lower coil mount and the upper coil bucket on the drivers side, but when i tighten it it pulls the drivers side down a little bit, if that makes sense.
the only thing that has occurred to me is to pull the truck at the frame laterally from the passenger, i just need to figure out something to hook on to.