Dngrngr
New Member
- Joined
- Oct 31, 2014
- Messages
- 7
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1999
- Make / Model
- Ford
- Transmission
- Automatic
Hey guys, I have a 99 4x4 3.0 ranger and I just purchased a 2000 Ford Explorer 5.0 2wd I got for a whopping $450.. I've done a ton of research and i couldn't pass up the deal on got on this one even though it wasn't awd. First question, can anyone tell me the engine harness pin out(believe it's the 42 pin connector) on the explorer and on my ranger, I'm about to go crazy looking through manuals for it. Question 2, i have the 2wd transmisson, is it possible to change the tailshaft housing and put an awd transfer case on it? Or will I need an awd transmission? I've been doing a little research on using my transfer case on the 4r70w and I believe it's an adapter from advanced adapters that I would need. I talked to a guy from there and the only adapter he thought they had was $550? Is that right?? I thought it was just something I bolted on, but he says it will need to be installed by a trans shop. Thanks I'm advance for the help!