• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

help 24 lbs injectors 4.0 v6 ohv


RANGERBRAZIL

Member
Solid Axle Swap
RBV's on Boost
Joined
Jun 23, 2014
Messages
39
Reaction score
12
Points
8
Location
Santa Vitoria do Palmar-Rio Grande do Sul-Brazil
Vehicle Year
1996
Make / Model
ranger stx
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4
Total Lift
11" lift
Tire Size
37x14.5x15 maxxis creepy crawler
My credo
Catolic
I'm from Brazil and I am looking for 24 lbs injectors for my ohv ...
found none listed for the 4.0 ohv v6 at the summit site!
need to know which to use?
My vehicle is a 1996 ranger 4.0 v6!:icon_welder:
 


RANGERBRAZIL

Member
Solid Axle Swap
RBV's on Boost
Joined
Jun 23, 2014
Messages
39
Reaction score
12
Points
8
Location
Santa Vitoria do Palmar-Rio Grande do Sul-Brazil
Vehicle Year
1996
Make / Model
ranger stx
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4
Total Lift
11" lift
Tire Size
37x14.5x15 maxxis creepy crawler
My credo
Catolic
I'm from Brazil and I am looking for 24 lbs injectors for my ohv ...
found none listed for the 4.0 ohv v6 at the summit site!
need to know which to use?
My vehicle is a 1996 ranger 4.0 v6!:icon_welder:



what is the injector for my 1996 ohv ??
I need a gun for 24 or 26 lbs ... which model ??
can send me a link to the summit site for me to buy?
thank you guys ... hope anybody help me!
Someone who knows the truth!
 

downer

Member
Joined
Jul 20, 2014
Messages
107
Reaction score
4
Points
18
Vehicle Year
97 4.0 OHV 4x4
Engine Type
4.0 V6
Transmission
Automatic
2WD / 4WD
4WD
how many different places are you going to post the exact same question? did you read my reply in a previous thread?

you need to look at what connectors your injectors have.
 

RANGERBRAZIL

Member
Solid Axle Swap
RBV's on Boost
Joined
Jun 23, 2014
Messages
39
Reaction score
12
Points
8
Location
Santa Vitoria do Palmar-Rio Grande do Sul-Brazil
Vehicle Year
1996
Make / Model
ranger stx
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4
Total Lift
11" lift
Tire Size
37x14.5x15 maxxis creepy crawler
My credo
Catolic
how many different places are you going to post the exact same question? did you read my reply in a previous thread?

you need to look at what connectors your injectors have.
I have not received any convincing ANSWER ...
And What does this hurt your life? :icon_confused:
 

RangerSVT

Oct 09 OTOTM
Article Contributor
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
RBV's on Boost
ASE Certified Tech
TRS Banner 2010-2011
TRS Banner 2012-2015
Joined
Mar 15, 2009
Messages
7,883
Reaction score
53
Points
48
Location
TRS since 2002 - NW KY
Vehicle Year
19962002
Make / Model
Ford
Engine Size
GT-40 5.0L EFI W/AC
Transmission
Automatic
You need to kool down a little. Sometimes it takes a couple days for members with answers to respond. You should have either 14 or 30 lb injectors stock, depending on your particular setup. You will have EV1 injectors. What color are your injectors, white, or red?

SVT
 

RANGERBRAZIL

Member
Solid Axle Swap
RBV's on Boost
Joined
Jun 23, 2014
Messages
39
Reaction score
12
Points
8
Location
Santa Vitoria do Palmar-Rio Grande do Sul-Brazil
Vehicle Year
1996
Make / Model
ranger stx
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4
Total Lift
11" lift
Tire Size
37x14.5x15 maxxis creepy crawler
My credo
Catolic
You need to kool down a little. Sometimes it takes a couple days for members with answers to respond. You should have either 14 or 30 lb injectors stock, depending on your particular setup. You will have EV1 injectors. What color are your injectors, white, or red?

SVT
My injectors have oem the top yellow and the lower metallic !!
equal to this link...

http://www.ebay.com/itm/2-Yr-Warranty-Bosch-Upgrade-4-Hole-Ford-Explorer-4-0L-91-95-Fuel-Injector-Set-/141420075403?fits=Make:Ford|Model:Explorer:icon_thumby:
 

RangerSVT

Oct 09 OTOTM
Article Contributor
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
RBV's on Boost
ASE Certified Tech
TRS Banner 2010-2011
TRS Banner 2012-2015
Joined
Mar 15, 2009
Messages
7,883
Reaction score
53
Points
48
Location
TRS since 2002 - NW KY
Vehicle Year
19962002
Make / Model
Ford
Engine Size
GT-40 5.0L EFI W/AC
Transmission
Automatic
Yellow tops are 19 lb squirters. Are you wanting OEM replacements?

SVT
 

snoranger

Professional money waster
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
RBV's on Boost
ASE Certified Tech
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Nov 25, 2007
Messages
13,055
Reaction score
13,529
Points
113
Location
Jackson, NJ
Vehicle Year
'79,'94,'02,'23
Make / Model
All Fords
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
My credo
I didn't ask for your life story, just answer the question!
Just search for 24lb injectors for an 87-95 5.0 mustang. They use the exact same injector as your 4.0l and 24lb injectors would be easier to find for a 5.0l.

They are EV-1, saturated, high impedance (10-15 ohm) injectors.
 

RANGERBRAZIL

Member
Solid Axle Swap
RBV's on Boost
Joined
Jun 23, 2014
Messages
39
Reaction score
12
Points
8
Location
Santa Vitoria do Palmar-Rio Grande do Sul-Brazil
Vehicle Year
1996
Make / Model
ranger stx
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4
Total Lift
11" lift
Tire Size
37x14.5x15 maxxis creepy crawler
My credo
Catolic
Just search for 24lb injectors for an 87-95 5.0 mustang. They use the exact same injector as your 4.0l and 24lb injectors would be easier to find for a 5.0l.

They are EV-1, saturated, high impedance (10-15 ohm) injectors.
staff ok ... I looked in my truck injectors , bosch 0280250972 is ...
researched in the bosch list ...
ev1 body , 1.3 design , flow rate at 3 bar 172.0 gallon per minute ohm15,9 , Straletyp C...
like here in Brazil everything is harder ... researched in the Brazil bosch site to see if there some car produced here ... found the injector Fiat Marea turbo ... the specifications below ...
ev1 body , 1.3 design flow 237 , 14.5 ohm, Straletyp c !!!!!!
I know n to calculate the flow ... but I think it is something like 26 lbs ... WHAT exactly accurate ... the only significant difference we saw is about ... my resistance is 15.9 ohm injector oem ... the fiat marea turbo is 14.5 ... it makes a difference ?

sorry my terrible english!!:icon_surprised:
 

snoranger

Professional money waster
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
RBV's on Boost
ASE Certified Tech
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Nov 25, 2007
Messages
13,055
Reaction score
13,529
Points
113
Location
Jackson, NJ
Vehicle Year
'79,'94,'02,'23
Make / Model
All Fords
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
My credo
I didn't ask for your life story, just answer the question!
staff ok ... I looked in my truck injectors , bosch 0280250972 is ...
researched in the bosch list ...
ev1 body , 1.3 design , flow rate at 3 bar 172.0 gallon per minute ohm15,9 , Straletyp C...
like here in Brazil everything is harder ... researched in the Brazil bosch site to see if there some car produced here ... found the injector Fiat Marea turbo ... the specifications below ...
ev1 body , 1.3 design flow 237 , 14.5 ohm, Straletyp c !!!!!!
I know n to calculate the flow ... but I think it is something like 26 lbs ... WHAT exactly accurate ... the only significant difference we saw is about ... my resistance is 15.9 ohm injector oem ... the fiat marea turbo is 14.5 ... it makes a difference ?

sorry my terrible english!!:icon_surprised:
No, that little difference in resistance won't make a real difference. Those injectors will work fine.

I'm surprised you're only looking for 24lb injectors if you're supercharging the engine. How much boost are you planning for?
 

RANGERBRAZIL

Member
Solid Axle Swap
RBV's on Boost
Joined
Jun 23, 2014
Messages
39
Reaction score
12
Points
8
Location
Santa Vitoria do Palmar-Rio Grande do Sul-Brazil
Vehicle Year
1996
Make / Model
ranger stx
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4
Total Lift
11" lift
Tire Size
37x14.5x15 maxxis creepy crawler
My credo
Catolic
No, that little difference in resistance won't make a real difference. Those injectors will work fine.

I'm surprised you're only looking for 24lb injectors if you're supercharging the engine. How much boost are you planning for?
3in pulley, about 7 lbs thrust...
this model bosch 0280 150 974, has a flow greater than 24 lbs! has about 29 lbs of flow! I think it will serve me well!:icon_thumby:
 

Sponsored Ad


Sponsored Ad

Staff online

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top