Smyrnagc
New Member
- Joined
- Jul 15, 2017
- Messages
- 4
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1988
- Make / Model
- Ford
- Transmission
- Manual
Good Evening TRS Forum:
I have a 1988 B2 that I have been restoring for approximately a year. The issue I have been trying to get corrected is an engine miss or sputter when going through the gears. It will get up to speed but when running through each gear there is a minor sputter/miss. Once it is up and running in 5th gear it runs smooth. There is no power loss at all.
Originally it struggled to get up to speed and would die when I came to a stop and I would have to restart it. With the below new parts that has stopped but it still sputters/misses a little when going through the gears.
In the past year I have replaced the following:
- Plugs and wires
- Distributor cap
- Both fuel pumps
- All new fuel injectors
- New fuel filter
Any thoughts on what could be causing this?
Thanks
I have a 1988 B2 that I have been restoring for approximately a year. The issue I have been trying to get corrected is an engine miss or sputter when going through the gears. It will get up to speed but when running through each gear there is a minor sputter/miss. Once it is up and running in 5th gear it runs smooth. There is no power loss at all.
Originally it struggled to get up to speed and would die when I came to a stop and I would have to restart it. With the below new parts that has stopped but it still sputters/misses a little when going through the gears.
In the past year I have replaced the following:
- Plugs and wires
- Distributor cap
- Both fuel pumps
- All new fuel injectors
- New fuel filter
Any thoughts on what could be causing this?
Thanks