Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Why did you have the distributor out? You need the set the timing correctly. You need to have a timing light. The correct procedure is as follows; On the passenger side of the motor up around the intake manifold, is two wires with a plug on the end of them. Remove the plug. Start the truck set the timing to the spec I believe mine is 7.5 BTDC. Plug the plg back in.
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
