jkw
New Member
- Joined
- Jan 9, 2012
- Messages
- 42
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1997
- Make / Model
- ranger
- Engine Size
- 302
- Transmission
- Automatic
please excuse the booger flux core tacks and camera phone pics. coil buckets are a couple inches wider for a 78 full width 44 going into a 97 2wd ranger.
made from 3/16"x6" flat bar. i want to mount using 4 grade 8 bolts from the side, and 2 from the bottom. possible add another piece of plate along the back of the coil bucket like on the bottom to mount on the top of the frame rail.
coil buckets will be taken to a professional to burn them together for good.
and advice is appreciated.
made from 3/16"x6" flat bar. i want to mount using 4 grade 8 bolts from the side, and 2 from the bottom. possible add another piece of plate along the back of the coil bucket like on the bottom to mount on the top of the frame rail.
coil buckets will be taken to a professional to burn them together for good.
and advice is appreciated.
Attachments
-
98.4 KB Views: 245
-
101.2 KB Views: 239
-
105.5 KB Views: 237
-
98.1 KB Views: 238