RjE
New Member
- Joined
- Apr 15, 2015
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1994
- Make / Model
- Mazda
- Engine Size
- 4.0L V6
- Transmission
- Manual
94 Mazda B4000
4.0 Liter V6
Manual 5 Speed
4x4 w/ RABS only
Hey Team,
I was checking under the hood and noticed a grounding terminal that had no wire attached. Looked around and found two broken pieces of wire, one is red and the other is black w/ green stripe. This was on the driver's side front fender well. I looked down at the wiring harness and finally saw the two broken ends, so I spliced in a temporary connection from the broken ends to the grounding terminal. After starting the truck I checked everything, but didn't notice any changes.
So--what do these wires go to? I checked the wiring diagram in the Haynes Manual but called no joy.
Pictures are attached--hope they help.
4.0 Liter V6
Manual 5 Speed
4x4 w/ RABS only
Hey Team,
I was checking under the hood and noticed a grounding terminal that had no wire attached. Looked around and found two broken pieces of wire, one is red and the other is black w/ green stripe. This was on the driver's side front fender well. I looked down at the wiring harness and finally saw the two broken ends, so I spliced in a temporary connection from the broken ends to the grounding terminal. After starting the truck I checked everything, but didn't notice any changes.
So--what do these wires go to? I checked the wiring diagram in the Haynes Manual but called no joy.
Pictures are attached--hope they help.
Attachments
-
18 KB Views: 183
-
65.4 KB Views: 190
-
85.1 KB Views: 179