phlowtey
New Member
- Joined
- Feb 28, 2012
- Messages
- 6
- Reaction score
- 0
- Points
- 0
- Transmission
- Automatic
I had a single 12" sub in a pre-fab enclosure in my truck. The enclosure pushed the passenger seat pretty far forward. I had another sub so I decided to see if there was a box design that would allow for both subs without pushing the seats forward. After relocating the rear speakers into the doors - http://therangerstation.com/forums/showthread.php?t=129372 - I was able to design a box that worked. Here is what I came up with.
It is divided into two chambers. Total volume is just shy of 2.5 cubic feet.
I cut the plastic panels and the carpeted panel in the back of the truck. The enclosure is wedged under the beam across the back under the window. The amp is connected to the subs and all four speakers. Running the wires was interesting.
The enclosure is back far enough that if it is pushing the seats forward at all it is minimal.
It is divided into two chambers. Total volume is just shy of 2.5 cubic feet.
I cut the plastic panels and the carpeted panel in the back of the truck. The enclosure is wedged under the beam across the back under the window. The amp is connected to the subs and all four speakers. Running the wires was interesting.
The enclosure is back far enough that if it is pushing the seats forward at all it is minimal.