Welcome Visitor! Please take a few seconds and 
swynx
Active Member
- Joined
- Mar 26, 2008
- Messages
- 2,401
- Reaction score
- 9
- Points
- 38
- Age
- 31
- Location
- lewiston idaho
- Vehicle Year
- 1994
- Make / Model
- Mazda
- Engine Size
- 4.0
- Transmission
- Manual
94 mazda b4000 has electric drivers seat, with up/down at front/back, and forward/backward controls, so 6 wires. The only 2 I care about are forward and reverse, which are red/white and yellow/white.
Problem is I broke off the control switch part, now I've figured out that if I jump power to the forward wire and ground the backwards wire the seat moves, vice versa.
I'm assuming I need a 3 way toggle. But how would I wire this up?
Thanks in advance
Problem is I broke off the control switch part, now I've figured out that if I jump power to the forward wire and ground the backwards wire the seat moves, vice versa.
I'm assuming I need a 3 way toggle. But how would I wire this up?
Thanks in advance
