Mike1919
New Member
- Joined
- Apr 20, 2015
- Messages
- 182
- Reaction score
- 0
- Points
- 0
- Location
- Fresno
- Vehicle Year
- 1993
- Make / Model
- Ford
- Engine Size
- 4.0
- Transmission
- Manual
I removed the front hub to do ball joints on my 93 with manual hubs and now I can't get that c-clip on the end of the axle. I can get a prybar and pry the u-joint/yoke to pull the axle out enough to expose the groove but there's no way I can put the splined washer on as well as the c-clip. It keeps pulling back towardd the differential. Any ideas?