• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Jumping/Hopping/vibrating when Cold


BryanG

Member
Joined
Nov 8, 2015
Messages
34
Reaction score
0
Points
6
Vehicle Year
1987
Make / Model
Ford
Transmission
Automatic
Sorry for such a poor description in the title but I don't know how else to explain it. My son's 2000 4.0 Ranger with 118k miles is now jumping, hopping or vibrating when put in gear when cold. By the time he is leaving our edition it stops doing it. It did it with me tonight while in reverse. Any ideas where to start? Tranny I'm assuming but not really sure. If I can come up with a better way to explain it I will. Thanks in advance.
 


97RangerXLT

97RangerXLT

Forum Staff Member
TRS Forum Moderator
Article Contributor
TRS 20th Anniversary
TRS Event Participant
Joined
Sep 18, 2007
Messages
6,791
Reaction score
3,924
Points
113
Location
Fishers, IN
Vehicle Year
1997
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Automatic
2WD / 4WD
4WD
Total Lift
2"
Tire Size
31"
Check your rear brakes. They might be sticking. (I am reading this as the rear end is hopping/ vibrating for a bit until it frees irself, and that the engine itself is running fine. If it is the engine, disregard...)

AJ

Sent from my Samsung Galaxy Note 4 while sitting in my underwear
 

BryanG

Member
Joined
Nov 8, 2015
Messages
34
Reaction score
0
Points
6
Vehicle Year
1987
Make / Model
Ford
Transmission
Automatic
97RangerXLT said:
Check your rear brakes. They might be sticking. (I am reading this as the rear end is hopping/ vibrating for a bit until it frees irself, and that the engine itself is running fine. If it is the engine, disregard...)

AJ

Sent from my Samsung Galaxy Note 4 while sitting in my underwear
Click to expand...
I will do that. We installed all new rear breaks about 1000 miles ago but that makes sense. The engine seems to be running just fine. Thanks I will post the fix as soon as I figure it out.
 

BryanG

Member
Joined
Nov 8, 2015
Messages
34
Reaction score
0
Points
6
Vehicle Year
1987
Make / Model
Ford
Transmission
Automatic
Well got a code P0303 which means cylinder 3 is misfiring. Trying a few things to diagnose this but I'm guessing it is the cause. Hope it's something easy I can fix. Will let you know.
 

BryanG

Member
Joined
Nov 8, 2015
Messages
34
Reaction score
0
Points
6
Vehicle Year
1987
Make / Model
Ford
Transmission
Automatic
Well tried injector cleaner and a new gas cap with no luck. There is spark from the coil to the cylinder as well. It's crazy how it seems to be happening mostly when the engine is cold. Also didn't start till the weather cooled off here and has been better since it has heated back up. Could be a vacuum leak I guess. It's getting beyond my ability so probably going to have to have a professional diagnosis it next.
 
97RangerXLT

97RangerXLT

Forum Staff Member
TRS Forum Moderator
Article Contributor
TRS 20th Anniversary
TRS Event Participant
Joined
Sep 18, 2007
Messages
6,791
Reaction score
3,924
Points
113
Location
Fishers, IN
Vehicle Year
1997
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Automatic
2WD / 4WD
4WD
Total Lift
2"
Tire Size
31"
The injector itself may not be firing, or intermittently sticking open and drowning the plug with gas.

Check the wire harness and plug to the injector as well

AJ

Sent from my Samsung Galaxy Note 4 while sitting in my underwear
 
ratdude747

ratdude747

Member
Supporting Member
Article Contributor
TRS 20th Anniversary
Joined
Aug 10, 2014
Messages
503
Reaction score
22
Points
18
Age
31
Location
Madison, IN
Vehicle Year
1995
Make / Model
Ford Ranger
Engine Type
4.0 V6
Engine Size
4.0L
Transmission
Automatic
2WD / 4WD
2WD
Tire Size
215/70R15
97RangerXLT said:
The injector itself may not be firing, or intermittently sticking open and drowning the plug with gas.

Check the wire harness and plug to the injector as well

AJ

Sent from my Samsung Galaxy Note 4 while sitting in my underwear
Click to expand...
Easy test: Run it for a short bit, then pull the plug. If it's dry, no fuel, if it's wet, no spark (ruled out), no compression, or flooding with gas.
 
Blown

Blown

Member
Joined
Dec 6, 2007
Messages
384
Reaction score
3
Points
18
Transmission
Automatic
I would do a compression test as well. You can get a gauge relatively cheap or borrow one.
 

BryanG

Member
Joined
Nov 8, 2015
Messages
34
Reaction score
0
Points
6
Vehicle Year
1987
Make / Model
Ford
Transmission
Automatic
Cylinder 3 had a bad spark plug. All 6 have been replaced with Motorcraft and problem is solved.
 
You must log in or register to reply here.

Sponsored Ad


Sponsored Ad

Staff online

Members online

Total: 700 (members: 13, guests: 687)

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Truck of The Month


Shran
April Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

Latest Album Photos

Hunters
20240409_190831.jpg
20240409_190818.jpg
20240409_180824.jpg
20240409_182648.jpg
20240409_181010.jpg
20240408_175026.jpg
99 Ranger
20200706_161414.jpg
20240207_155117.jpg
20240207_155111.jpg
20240207_154537 - Copy.jpg

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top