Welcome Visitor! Please take a few seconds and 
- Joined
- Mar 31, 2010
- Messages
- 209
- Reaction score
- 1
- Points
- 18
- Location
- Kearny, NJ
- Vehicle Year
- 1989
- Make / Model
- Ford
- Engine Type
- 2.9 V6
- Engine Size
- 2.9L V6
- Transmission
- Manual
- 2WD / 4WD
- 4WD
- Total Lift
- 1"
- Tire Size
- 31x10.5R15
89 Ranger
At first I thought it was just the flasher switch, so I replaced it, but the problem was still there. I checked the fuse and it was spent, so I replaced it. However, every time I turn the truck to the ON position, the fuse blows. I tried doing it with the truck in neutral thinking that perhaps the reverse lights were the problem, but it blew like that anyway. How can I track down what is blowing the fuse? Even more importantly, how can I track it down without going through a million fuses?
Thanks.
At first I thought it was just the flasher switch, so I replaced it, but the problem was still there. I checked the fuse and it was spent, so I replaced it. However, every time I turn the truck to the ON position, the fuse blows. I tried doing it with the truck in neutral thinking that perhaps the reverse lights were the problem, but it blew like that anyway. How can I track down what is blowing the fuse? Even more importantly, how can I track it down without going through a million fuses?
Thanks.
