• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

My 2.9 engine is knocking!!! i need some suggestions on how to stop it


ChaiseV

New Member
Joined
Dec 27, 2011
Messages
3
Reaction score
0
Points
0
Location
Kalispell, MT
Vehicle Year
1990
Make / Model
Ford
Engine Size
2.9
Transmission
Automatic
I have recently took my 1990 Ranger to a mechanic to get the fuel gauge fixed and after he got done he told me that the reason my engine is knocking is the lifters. i told him that my dad had them adjusted before but the just stopped for while and went back to knocking. He told me that one way of fixing it is adjusting the lifters by using loctite on the adjusting bolts so they stay in place. i want to know if that is the best way to stop it from knocking or is there a better way to do it
 


pcollins

New Member
Joined
Mar 19, 2010
Messages
957
Reaction score
7
Points
0
Location
Middle of Nowhere, NY
Vehicle Year
2012
Make / Model
GMC
Engine Size
4.8L
Transmission
Automatic
Knocking and ticking are two very different things. If you have a tick, it can be fixed/ignored. A knock is a little more serious.
 

country0001

Active Member
TRS Banner 2010-2011
Joined
Dec 10, 2008
Messages
2,512
Reaction score
14
Points
38
Age
49
Location
Stillwater, OK
Vehicle Year
1990,92
Make / Model
Ford,Ford
Engine Size
4.0,5.0
Transmission
Manual
2.9's tick. Its part of their charm. They have oiling problems. You can fix it and flush the engine. Or drop a 4.0 in.
 

Mudflap

New Member
Joined
Feb 9, 2012
Messages
18
Reaction score
1
Points
3
Location
Lucasville, OH
Vehicle Year
1988
Make / Model
Ford
Engine Size
5.0
Transmission
Manual
The 2.9s were notoriously hard on lifters. I've replaced more than one set getting rid of the dreaded peck.
 

adsm08

Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
Joined
Sep 20, 2009
Messages
34,623
Reaction score
3,613
Points
113
Location
Dillsburg PA
Vehicle Year
1987
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Manual
2WD / 4WD
4WD
Tire Size
31X10.50X15
The problem with 2.9 lifters is in their design. There is no return hole for the oil, just the in hole. That means that dirt and air can't get back out either.

Lifters and cam bearings help, but the fix is to get a 4.0 and chamfer the oil passages through the rods so they don't gall the lifters.
 

Pt_Ranger_V8

FullsizeFreakin'
U.S. Military - Active
Forum Staff - Retired
Joined
Jul 6, 2001
Messages
10,574
Reaction score
3
Points
38
Location
in ur g'rage, uzin' u're toolz
Vehicle Year
19 something
Make / Model
ford
Transmission
Automatic
Best way to make it stop is to turn it off :icon_idea: :icon_twisted:


Seriously. Is it a tick or a knock? :dunno:
 

ChaiseV

New Member
Joined
Dec 27, 2011
Messages
3
Reaction score
0
Points
0
Location
Kalispell, MT
Vehicle Year
1990
Make / Model
Ford
Engine Size
2.9
Transmission
Automatic
Tick or knock

i hate to sound dumb but what is the difference between a tick and a knock?
 

Jraymer360

New Member
Joined
Jan 20, 2012
Messages
703
Reaction score
8
Points
0
Location
Belleville, MI
Vehicle Year
1993
Make / Model
Ford
Engine Size
4.0
Transmission
Automatic
i hate to sound dumb but what is the difference between a tick and a knock?
ticking is within the valvetrain. kinda like a worn pushrod hitting the rocker arm because of increased clearance.


Knocking (also called knock, detonation, spark knock, pinging or pinking) in spark-ignition internal combustion engines occurs when combustion of the air/fuel mixture in the cylinder starts off correctly in response to ignition by the spark plug, but one or more pockets of air/fuel mixture explode outside the envelope of the normal combustion front.
 

ChaiseV

New Member
Joined
Dec 27, 2011
Messages
3
Reaction score
0
Points
0
Location
Kalispell, MT
Vehicle Year
1990
Make / Model
Ford
Engine Size
2.9
Transmission
Automatic
Its ticking

It is defiantly ticking so is there good ways to make it stop besides just replacing the lifters?
 

wrecking-crew

New Member
Joined
Sep 6, 2008
Messages
2,791
Reaction score
25
Points
0
Age
34
Location
dirty jersey
Vehicle Year
06 chevy
Make / Model
88 ranger
Engine Size
6 cylinders
Transmission
Manual
I have found Lucas oil additive quiets them. Don't mess with it unless it gets worse.
But my way of quieting them currently is having the exhaust cut off behind the cab. :icon_twisted:
 

4.0B2

Well-Known Member
Supporting Member
TRS Banner 2012-2015
Joined
Sep 24, 2009
Messages
10,700
Reaction score
151
Points
63
Location
Walls, MS
Vehicle Year
1988
Make / Model
Ford
Engine Size
4.0 v6
Transmission
Automatic
if a 2.9 doesn't tick...something is wrong IMO. its just one of those things...

a knock, think running a motor without oil...and you'll hear a knock!
 

kimcrwbr1

Well-Known Member
Joined
Dec 6, 2009
Messages
6,044
Reaction score
46
Points
48
Location
maplevalley WA
Vehicle Year
1983
Make / Model
ford
Engine Size
2.8l
Transmission
Automatic
Try putting 1/2 a quart of ATF in the engine about 100 miles before you change the oil. Drain it good and put synthetic oil with a motorcraft filter. If your engine is full of oil drain 1/2 a quart before putting the tranny oil in. If your engine has leaks dont use synthetic it will leak faster just use a good 10W30 I prefer valvoline.
 

kimcrwbr1

Well-Known Member
Joined
Dec 6, 2009
Messages
6,044
Reaction score
46
Points
48
Location
maplevalley WA
Vehicle Year
1983
Make / Model
ford
Engine Size
2.8l
Transmission
Automatic
The way to adjust the lifters is with the engine cold put each cylinder on TDC turn the adjuster out counterclockwise until you feel lash tak it back down to zero lash and count the turns clockwise 1 1/2 turns make them all the same. Pull all the spark plugs and stick your finger in the #1 plug hole and with a wrench turn the crank clockwise (never counterclockwise) until you feel compression. Look at the timing marks and put it on TDC. Adjust the #1 lifters then put a long thin screwdriver in the next cylinder in the firing order and turn the crank until that piston is at the top and adjust those valves. Follow the firing order and then install new valve cover gaskets. Any type of ATF is a good engine flush just add 1/2 a quart and run it for about 100 miles before you change the oil. Do that a couple times before you pull the valve covers it dissolves the sludge that gets built up over time.
 

Ianjay

New Member
Joined
Jul 4, 2012
Messages
5
Reaction score
1
Points
3
Location
Toronto, Ontario
Vehicle Year
1990
1990
20
Make / Model
Ford Ranger sup
Engine Size
2.9
Transmission
Automatic
Reviving an old thread here. Sorry.
I have two 1990 Rangers, both 2.9s, one auto, one 5spd. The 5-spd used to tick after driving on the highway. I tried all additives and flushed it many times. What has cured it is using the K&N oil filter that has the one inch nut on it. At first I thought it was a fluke, but now, after a second oil change and another filter, the 5 spd is quiet when you get off the highway. They both rattle a little when starting cold after sitting for a week. If there are any 2.9s left, this is worth a try. The manual has 381,000 kms, the auto has 149,000 kms.
 

Brownie Mobile

New Member
Joined
Mar 7, 2012
Messages
413
Reaction score
1
Points
0
Location
Williston, ND
Vehicle Year
1985
Make / Model
Ford
Engine Size
5.0
Transmission
Manual
I'm pretty sure thicker oil will quiet your tick.
 

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top