- Joined
- Nov 27, 2008
- Messages
- 512
- Reaction score
- 63
- Points
- 28
- Location
- central IL
- Vehicle Year
- 1994
- Make / Model
- ford
- Engine Type
- V8
- Engine Size
- 1975 302
- Transmission
- Automatic
- 2WD / 4WD
- 2WD
- Total Lift
- 6+3
- Tire Size
- 33/12.50/15
I could not find a missing wire on my truck after I had replaced the head. It was near the crank sensor. I didnt catch that there was a second plug that came off the crank sensor and the single wire was gone inside the wire loom, and the plug had a short piece of wire left. I fixed that problem and it was running a lot better, not perfect but a lot better. I was checking the wires and when I pulled up on the harness the truck died. I am not good with electrical stuff so any ideas on what to check? Its the crank sensor wires and 2 other harnesses that are attached. I'm not sure what the single wire went to. Any ideas would be great. It looks like the wires are in good shape the plugs on the ICM are tight. Any ideas on attacking this problem?