Welcome Visitor! Please take a few seconds and crpowell67
New Member
- Joined
- Nov 3, 2016
- Messages
- 8
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1989
- Make / Model
- Ford
- Transmission
- Manual
I had purchased a 89 ranger xlt the passenger side rear lights had stopped working I pulled a diagram from mitchell on demand 5 and re did the wiring
(the person I got it from put a new bed and when wiring I found he used loads of masking tape which was coming off everywhere)
so everything works when lights are off when I turn the lights on everything works till I hit the brakes then passenger side lights go off let off brakes they come back on
I am thinking ground issue but want to see what other think
(the person I got it from put a new bed and when wiring I found he used loads of masking tape which was coming off everywhere)
so everything works when lights are off when I turn the lights on everything works till I hit the brakes then passenger side lights go off let off brakes they come back on
I am thinking ground issue but want to see what other think
