Welcome Visitor! Please take a few seconds and tycksena
New Member
- Joined
- Jul 15, 2013
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1999
- Make / Model
- Ford
- Transmission
- Automatic
My Ranger has had a check engine on for a while now and I finally have another car that I can drive so I can take this apart and fix it. I have done the scans and got a P1151 code.
I have tried looking for a vacuum leak with carb cleaner but have had no luck. Could somebody post a picture to help me identify all of the vacuum lines? I want to make sure and check all those before doing anything drastic.
Also I have heard of problems with the fuel rail-to-intake gasket manifold but the Ford TSB is for '97 Rangers with the 4.0L. My question is was this a problem for '99 Rangers too?
Thanks for the help!
I have tried looking for a vacuum leak with carb cleaner but have had no luck. Could somebody post a picture to help me identify all of the vacuum lines? I want to make sure and check all those before doing anything drastic.
Also I have heard of problems with the fuel rail-to-intake gasket manifold but the Ford TSB is for '97 Rangers with the 4.0L. My question is was this a problem for '99 Rangers too?
Thanks for the help!
