Mark_88
Well-Known Member
- Joined
- Aug 11, 2007
- Messages
- 18,554
- Reaction score
- 240
- Points
- 63
- Age
- 68
- Location
- Ontario, Canada
- Vehicle Year
- 2007
- Make / Model
- Dordge
- Engine Size
- 3.3 Fuel Injected
- Transmission
- Automatic
- My credo
- Love Thy Neighbor
Hi all,
I had swapped out the wiring and everything for my first gen (1988) onto a 96 frame and still haven't finished the lights for the back end. I was actually thinking of putting a 96 box on the frame and maybe some day a 96 or 97 cab...some day...
For now I am looking at the lights for the 92 and, as you would know, they are two bulb lights...turn/brake in one and reverse bulb in the lower. The 96 harness is three bulb and I wanted to figure out how to do that...essentially turning the top socket into a brake/tail light connection (I still have the old sockets from the (1988) that I could wire in if need be...
Just a matter of the "how to" do it...
Anyone done this before?
TIA for any and all information...
I had swapped out the wiring and everything for my first gen (1988) onto a 96 frame and still haven't finished the lights for the back end. I was actually thinking of putting a 96 box on the frame and maybe some day a 96 or 97 cab...some day...
For now I am looking at the lights for the 92 and, as you would know, they are two bulb lights...turn/brake in one and reverse bulb in the lower. The 96 harness is three bulb and I wanted to figure out how to do that...essentially turning the top socket into a brake/tail light connection (I still have the old sockets from the (1988) that I could wire in if need be...
Just a matter of the "how to" do it...
Anyone done this before?
TIA for any and all information...