Well, I made some brackets, and I hated how high the lights had to sit, so I ditched that effort. I ended up cutting the inside of the firewall for access holes. Then I drilled through the cowl and mounted the lights (it was a real Bit@h to get the bolt on the bottom ha ha) then I drilled a hole behind the light and coated my wire with some steel A/C wire coating, ran my wire through the new hole and grabbed it with a coat hanger. Then I made face plates out of an old washing machine my apartments were throwing away
to cover the new holes in the firewall and screwed them in place so they are removable for access. Looks real clean. And it only took about an hour of work. And 45 mins of cleaning out the inside of the cowling ha ha. Luckily it was not rusted out, just crammed packed with leaves, acorns, and a fork? I also screwed some mesh screening in place to keep debree from getting inside. I'm happy with it so far and now I can actually use my lights, and not worry about crushing them on the rocks anymore. If I had internet I would post pics, but I'm on my phone so I can't put them up yet. Thanks for all the input guys. Any questions feel free. to ask, drive safe out there.
And 4.0Bii, that was a sweet deal you got on your bii. Good lookin rig, keep the updates comin on the forum.