Welcome Visitor! Please take a few seconds and erwinrangerfan
New Member
- Joined
- Apr 23, 2017
- Messages
- 4
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1993
- Make / Model
- ford
- Transmission
- Manual
i have a 93 ford ranger 2wd 5speed 2.3l.. an i just bout a 93 ford ranger 2wd with a 3.0l 5speed. with a bad trans. so im gonna swap the 2.3 drivetrain into the 3.0 truck.. all the wiring in the engine bay looks the same in both trucks. with the exception of the started wires since the 3.0 starter is on the driver side an the 2.3 is on the passenger side. i know i have to swap ecus.. when i pulled the motors i unplugged the engine harnesses from the wiring on the driver side fenderwell. and pulled them complete.. does anyone know if i have to swap all the rest of the wiring from one truck to the other. or can i just swap ecus and plug them up to the wiring on the fenderwell. the plugs look the same to me.. need info!!!!
