Speedfreak
New Member
- Joined
- Mar 13, 2016
- Messages
- 1
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1997
- Make / Model
- Mazda
- Transmission
- Manual
Hey all so I'm new to the brand, just picked up a nice little 97 b2300 2.3L 5 speed 2wd short bed, thinking pre runner style, anyway my temp gauge got stuck the day I drove it home, it was working was cold then got to temp but the next time I went to drive it noticed the gauge shows it at operating temp on the middle now all the time on or off the gauge never moves, I'm wondering where to start, cluster or sending unit? Every other issue I found was gauges dead or fluctuating but being in the middle even when I shut off the truck I'm thinking its a cluster issue. Thanks.
Ps I know she runs right I ran it home a good 30min highway drive (27km) and was attempted to be run over by a logging truck and had the ol gal doing 130km (that's about 80mph) for a good stretch and after I was able to hold my hand on the rad fins without being burnt.
Ps I know she runs right I ran it home a good 30min highway drive (27km) and was attempted to be run over by a logging truck and had the ol gal doing 130km (that's about 80mph) for a good stretch and after I was able to hold my hand on the rad fins without being burnt.