Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
move wires around to see if problem follows the wire.I recently had a misfire on #2 also then it was #4 I found a crack on the bottom of my coil pack, replaced that and still no change changed the plugs with no help there also the wires were just replaced about a month back and I decided the check the wires again and sure enough they were defective replaced them under store warranty and it fixed the problem, so I would check over ur wires again just a thought.
I keep getting number 2 cylinder misfire code. I changed wires and plugs still no change only seems to come on when idling if that helps!
FYI, cylinder #2 is looking at the engine from the FRONT of the vehicle on the LEFT side, not sitting in the vehicle.
Hey look! What I just said in a picture!
Hey look! What I just said in a picture!
I know this. Not everyone does. Some people don't. I simply stated it the way I did so everyone understood. Not everyone on here is a technician bud.that is why design engineers refer to driver/passenger not left/right.