- Joined
- Mar 24, 2010
- Messages
- 1,890
- Reaction score
- 42
- Points
- 48
- Location
- Duluth GA
- Vehicle Year
- 1987
- Make / Model
- FORD
- Engine Type
- V8
- Engine Size
- 5.0
- Transmission
- Manual
- 2WD / 4WD
- 2WD
so heres my first snag building up my 302.. i have a 99 exploder 302 with an 80's mustang oil pan... i have the explorer dip tube n stick and a 94 mustang 302 tube with out the stick and i know the tube on an 80's ltd is 16.5 inches from end to end without tube.. i like the explorer tube cause its not too big but its stick is 25 inches and its tube is 17.5 inches.. its sticks into the motor 7.5 inches..
my question is whats the length of a fox body stick from base of handle to the end and how far does it enter the motor so i can modify the explorer one..
if i could find an actuall fox tube/stick i would, so far all ive found was a cracked tube at pull a part..
my question is whats the length of a fox body stick from base of handle to the end and how far does it enter the motor so i can modify the explorer one..
if i could find an actuall fox tube/stick i would, so far all ive found was a cracked tube at pull a part..