ernest_pizza
New Member
- Joined
- Nov 17, 2017
- Messages
- 7
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1998
- Make / Model
- Ford
- Transmission
- Manual
I have a 1998 Ranger 4x4 with a manual transmission and the 3.0 v6. I've been planning to convert my 3.0 to a 5.0 v8, intending to keep it as a manual transmission with selectable 4wd (with a low range) and use EFI. Reading around on here I've put together a preliminary list of parts I'm going to need to swap into the ranger. My questions are: Will these parts work well together? Is there anything else I'd need to change/modify? Are there any other important considerations I'm overlooking?
Here's the list:
-1996-1997 Ford Explorer 5.0 AWD
-M5ODR2 transmission from a 1997-2003 F150 4.2 v6
-4x4 transfer case out of the same F150
-164 tooth flywheel/clutch/pressure plate/starter from a vehicle with the same parts as a 1996 F150
Thanks for any answers!
Here's the list:
-1996-1997 Ford Explorer 5.0 AWD
-M5ODR2 transmission from a 1997-2003 F150 4.2 v6
-4x4 transfer case out of the same F150
-164 tooth flywheel/clutch/pressure plate/starter from a vehicle with the same parts as a 1996 F150
Thanks for any answers!