Welcome Visitor! Please take a few seconds and stevenstosz
New Member
- Joined
- Nov 30, 2014
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1985
- Make / Model
- ford
- Transmission
- Automatic
duraspark conversion question,, the wiring diagrams show the ignition module[ blue grommet] to have six wires . A two pin connector WITH the red and white to power the unit. Now for the four pin connector,
[ARTICLE SAYS green goes to the neg. side of the coil.]
my green wire is the bottom one. The diagram SHOWS the green wire being the forth one from the bottom. Do I go with the green colored wire or the fourth wire from the bottom which in my case FROM THE BOTTOM UP
----------WHITE
----------RED
---------------PURPLE
---------------ORANGE
---------------BLACK
---------------GREEN
[ARTICLE SAYS green goes to the neg. side of the coil.]
my green wire is the bottom one. The diagram SHOWS the green wire being the forth one from the bottom. Do I go with the green colored wire or the fourth wire from the bottom which in my case FROM THE BOTTOM UP
----------WHITE
----------RED
---------------PURPLE
---------------ORANGE
---------------BLACK
---------------GREEN
Last edited:
