alwaysFlOoReD's race truck

alwaysFlOoReD · May 29, 2015

At the track this weekend. Passed tech, racing tomorrow and Sunday.

Sent from my XT1032

alwaysFlOoReD · May 30, 2015

I got third in the drags. I'm not sure how I placed in the slaloms. 33 trucks showed up, about a dozen in my prolite class.

Sent from my XT1032

alwaysFlOoReD · Jun 1, 2015

Today I got second in the drags and fifth in the slaloms, good enough for third place in my class.

Sent from my XT1032

alwaysFlOoReD · Jun 2, 2015

Link to aerial videos of the races by Ryan Gosselin; https://www.youtube.com/user/Turmbar31/videos and vids by Angie zukchick; https://www.youtube.com/watch?v=-LhKtp_aXKI&list=PLNaFtiYDYopDpDJu5-lpwevhrOAGqg2xs

I'm in the black and white 91 Ranger,
starting at 25 seconds of https://www.youtube.com/watch?v=TRSIRkE0mms
The first 15 seconds of; https://www.youtube.com/watch?v=e7KuJQl_zWc
and the first 1/2 of this; https://www.youtube.com/watch?v=MUZB-XwgrMI&list=PLNaFtiYDYopDpDJu5-lpwevhrOAGqg2xs&index=7

alwaysFlOoReD · Jun 4, 2015

Over four minutes of video of me and my truck racing at TORE offroad park southwest of Edmonton.
https://www.youtube.com/watch?v=gLWyV8CZdD0

jprevat · Jun 29, 2015

I just went through your whole build thread. Keep up the great work man!

alwaysFlOoReD · Jul 5, 2015

Thanks. Its a slow process.

Sent from my XT1032

alwaysFlOoReD · Jul 9, 2015

A quick update;
I'm racing this coming weekend at Soks Pit, Edson, west of Edmonton. I've done nothing to my truck. But, I've fixed the steering in my '77 f250, done a bunch of modifications to my 18' carhauler to be able to be hauled behind the truck /camper, loaded the 11.5' camper [that I rebuilt several years ago and this is the first use since] onto the f250, and bought and fixed a 14' carhauler to be used for my renovation business. Tomorrow I will try to fabricate an e-brake handle for the racetruck and try to find some time to practice for the drags. Also need to load the camper and trailer with tools and food etc. Wish me luck at the races....

Richard

prerunner · Jul 9, 2015

Good luck and have fun at the races, Richard. :icon_thumby:

alwaysFlOoReD · Jul 14, 2015

I had a great time at the races. This event was hosted by the "Edson Screaming Demons" 4x4 club, part of the "WORR series" in western Canada. I came in 4th overall in my class, just out of the money for the first time....Damn. I can only try to improve my reaction time in the drags as that was my downfall this weekend. My truck and I are capable as I beat the eventual winner but got knocked out because I redlighted 2 of the 4 times at the lights. In my last slalom run I landed hard and seperated a ground wire giving me a DNF. I will be going over the wiring and fixing any loose ones pronto. It was a great venue and very few hiccups which was also great as it was the Demons first time hosting an event. Job well done.

Richard

alwaysFlOoReD · Aug 10, 2015

I've been doing some work on my truck for the last few days. As always I leave stuff to the last few days, as the races are next weekend. I took a pretty hard landing last race where I separated a ground wire. I also did some damage to the rear fenders. I decided to change the fender mounting to help prevent further damage.
Some pics;

As you see, I never painted anything when I first made this mount. I'll have more pics after the paint dries[emoji12]

Sent from my XT1032

alwaysFlOoReD · Aug 10, 2015

Another project I did was to change my shocks. I picked up some procomp shocks at 4WheelParts, the series main sponsor, and finally mounted them. This meant disconnecting the rear spring mounts and shimming the frame 2 3/4" from the axle, the same amount the shock protruded from the housing
This made a fool proof way of making sure the shock wouldn't be completely collapsed before the rubber bumpstops are compressed.

I used some tube that I salvaged from a trailer jack. It happened to be the right inside diameter for these shocks. I cut out a side and then drilled for the shock bolts. Instead of using the supplied shims, I made mine from 1/2" pipe. I cut to the correct length and drilled the inside with a 1/2" bit. This meant I could use 1/2" bolts instead of whatever stock ones were meant for this shock application.

Sent from my XT1032

alwaysFlOoReD · Aug 10, 2015

My rear bumper was really bugging me because it listed to the drivers side by an inch. I spent an hour removing all the bolts and cleaned some rust. I then remounted so its now level. Only esthetics but it makes me happy. It might even add some horsepower... Who knows lol.

Sent from my XT1032

alwaysFlOoReD · Aug 12, 2015

In another thread I posted about a no start problem
It's running again though no knowledge why. Onto other things I need to look at. Last time I ran the truck hard I noticed the top rad hose collapse when I stopped. I'm changing the hose out for one with a spring inside, hopefully that solves the overheat problem.

Sent from my XT1032

alwaysFlOoReD · Aug 15, 2015

I got to the track last night under cloudy skies. Today its pissing. Forecast is 1/2" rain today. Part of the track is an old clay oval....can you say goose shit?

Sent from my XT1032

alwaysFlOoReD's race truck

Forum Staff Member

Attachments

Forum Staff Member

Forum Staff Member

Attachments

Forum Staff Member

Forum Staff Member

Member

Forum Staff Member

Forum Staff Member

New Member

Forum Staff Member

Forum Staff Member

Forum Staff Member

Forum Staff Member

Forum Staff Member

Forum Staff Member

Sponsored Ad

Sponsored Ad

Today's birthdays

Member & Vendor Upgrades

Truck of The Month

Recently Featured

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store

Sponsored Ad

Sponsored Ad

Sponsored Ad

Amazon Deals