01_4x4
New Member
- Joined
- Aug 15, 2010
- Messages
- 4
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 2001
- Make / Model
- Ranger ext cab
- Transmission
- Automatic
As title says, my Ranger keeps blowing the 10A fuse for my heater/AC blower. This also controls the overdrive ON/OFF circuit. I believe this is what's popping the fuse. I removed the housing around the steering column & the 2-wire harness going to the overdrive button was tighter that a banjo string. I got some slack in this but the fuse still pops (usually when I put the truck in gear.It's an automatic.)
I bought a Haynes manual but guess what? The POS manual has a cheesy wiring schematic in the back of it but yup ...no blower/overdrive circuit. WTF???
So I'm wondering in anyone has this schematic for the blower/overdrive circuit they can scan and send me or have you ever found a short in this area before.
Anyone know how that harness runs down from the steering column...This is on a 2001 Ranger ext cab 4.0L with auto tranny.
Please help!!!!
I bought a Haynes manual but guess what? The POS manual has a cheesy wiring schematic in the back of it but yup ...no blower/overdrive circuit. WTF???
So I'm wondering in anyone has this schematic for the blower/overdrive circuit they can scan and send me or have you ever found a short in this area before.
Anyone know how that harness runs down from the steering column...This is on a 2001 Ranger ext cab 4.0L with auto tranny.
Please help!!!!