Samueljg29
New Member
- Joined
- Aug 13, 2018
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Location
- California
- Vehicle Year
- 2006
- Make / Model
- Ford
- Engine Size
- 3.0
- Transmission
- Automatic
I’m new to the forums but read up a lot on them. I’ve been doing research for a while but still get mixed answers to my specific situation. Long story short, I have a 2006 Ford Ranger xlt 2wd 3.0 with 3.73 gears. I’d like to get a small 2-2.5 inch lift leveled out with either a 31x10.5x15 or 32x11.5x15. I have coil springs in front and the rear is 1 inch taller then the front stock. My question is, what set up would be best? What kind of lift with the wheel and tire sizes I just put up? I see coil spacers but that for the front. I see spindle and shackle set ups but only can find 4 inch kits.
Sorry if this has been posted before but I can’t seem to get a good enough answer to help with my decision.
Sorry if this has been posted before but I can’t seem to get a good enough answer to help with my decision.