woodermizer
New Member
- Joined
- May 21, 2017
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Location
- SE PA
- Vehicle Year
- 1999
- Make / Model
- Ford
- Engine Size
- 3.0L
- Transmission
- Automatic
So I'm going to be replacing the head gaskets on my daily driver this weekend. Helped a friend with his before so luckily not going in blind.
Did have a question about the bolt size though. For the life of me I cannot find a reference online to the diameter or TPI of the head bolts themselves. Only asking as I'd like to get in there with a tap and clean out the interior threads once everything is apart. As this is my primary form of transportation I'll be a little stuck at that moment and would like to have everything ahead of time...
Any help would be appreciated on this, thanks!
Did have a question about the bolt size though. For the life of me I cannot find a reference online to the diameter or TPI of the head bolts themselves. Only asking as I'd like to get in there with a tap and clean out the interior threads once everything is apart. As this is my primary form of transportation I'll be a little stuck at that moment and would like to have everything ahead of time...
Any help would be appreciated on this, thanks!