rangerred
New Member
- Joined
- Sep 8, 2007
- Messages
- 19
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 2001
- Make / Model
- Ford
- Transmission
- Automatic
I've recently installed a drivers side window motor, switch and gear mechanisim in my '01. The motor, had been rebuilt, all else is new.
It's now operating sporatically, most often getting stuck in the fully closed position. I can here a "click" noise, as if a relay or contact is pulling in, when I unsuccessfully try to lower the window.
Eventually, it will open , but it's getting worse with time.
Is there in fact a relay/contact I'm overlooking? I'd sure rather replace one of those instead of tearing out the door guts again.
It's now operating sporatically, most often getting stuck in the fully closed position. I can here a "click" noise, as if a relay or contact is pulling in, when I unsuccessfully try to lower the window.
Eventually, it will open , but it's getting worse with time.
Is there in fact a relay/contact I'm overlooking? I'd sure rather replace one of those instead of tearing out the door guts again.