Seats from a 00 Mustang urgent

User Name missing · Mar 16, 2009

Found a set of seats from a 2000 Mustang, plain manual buckets. Will these direct bolt in to my '96 std cab ranger with 60/40's??? What about the seats from a 01 Escape? Although these ones looks like they would not. One last question, does my ranger have the wiring harness needed for power seats? A fast reply is much appreciated!!!!

dogboy · Mar 16, 2009

Unless you already have power seats, I do not think it has the harness already there.

I don't think either of those seats would "bolt in", but I don't think it would take much work to make them fit, either.

User Name missing · Mar 18, 2009

Lemme ask another question, since the answer to this one is no where to be found. What years explorers/mustangs/escorts seats WILL BOLT IN on my '96 Ranger? The one junk yard is a treasure trove of these vehicles, but good seats are rare do to missing windows/doors or engine componets sitting on the seats. thanx

Hazmat Ranger · Mar 18, 2009

This took about 5 seconds in the Tech Library:

http://www.therangerstation.com/tech_library/Seats.html

fastpakr · Mar 18, 2009

Wiring them in (at least with the Explorer seats) is just a matter of getting them power from a fused source. There's nothing to it at all.

User Name missing · Mar 19, 2009

once again, that page DOES NOT specify what years will bolt in. Does it say that a 02 exp. seats will bolt in? no, thats what Im asking. I assumed a few ppl here has tried various years with or w/o luck.........I cant afford to gamble buying a set of seats and not fit. I already bought a set of wipers arms that wont work........looked exactly the same so I assumed they would work........well I shoulda known better than to ASS-U-ME anything.

Hazmat Ranger · Mar 19, 2009

Sorry - I read but missed that in the second post . . . not trying to be a smart ass or anything :beer:

. But good luck with your search anyway - I will be checking back for a final decision so I will be more informed . . . :icon_thumby:

User Name missing · Mar 19, 2009

no prob, im a lil frayed around the edges today. things been kinda rough lately, so ignore me if I sounded like an ass, but I also get that problem alot where ppl dont read my posts entirely. rubs me the wrong way.

flyingbrick · Mar 19, 2009

I just bolted in some 2002 Explorer Sport (2 door) buckets in my dads 2006 extended cab. all you need to do is open up 2 holes in each seat mount, and it'll bolt up to the floor pan. I'll take some pictures tonight.

User Name missing · Mar 23, 2009

what about seats from a newer escort, say a zx2 or that style? saw plenty of those around. Im planning to take the tracks of the passenger seat and go root around tomorrow to see what I can get. however it would be nice to know ahead of time cause I dont think the JY will be open for long after I can finally make it there

User Name missing · Mar 25, 2009

went to the JY yesterday. took my pass. seat bracket in to compare. everything i came across was either power, trashed or wouldnt work. I only took a ratchet and 10mm socket in (size used to remove my seats) and I came across a cpl ZX2's that looks like it may work, but I couldnt get them out cause I needed a larger socket. guess Im SOL.

oreos3403 · Apr 5, 2009

ok its always better to use your tracks if they work good but if you need new tracks then measure the tracks from your vehicle from bolt to bolt where they mount to the floor front to back and side to side take your notes and measuring tape to junk yard and measure away if you need just the seat measure were your seats bolt to the tracks if they line up then the seats will work i personally found all mustang seats bolt right to the tracks and is a 30 minuet swap and they are very comfortable if the seats you find have power the power part is part of the track so just throw the power track away and bolt the seat part to your frame as long as the seat has the manual recline

oreos3403 · Apr 5, 2009

now in my sons 1997 ranger reg cab mustang seat conversion i had to grind the top bar of his track to mount the seat to his frame ill see if i can find the sticky i used and post it

Seats from a 00 Mustang *urgent*

New Member

Active Member

New Member

May 2009 STOTM

Forum Staff Member

New Member

May 2009 STOTM

New Member

New Member

New Member

New Member

New Member

New Member

Sponsored Ad

Sponsored Ad

Today's birthdays

Member & Vendor Upgrades

Truck of The Month

Recently Featured

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store

Sponsored Ad

Sponsored Ad

Sponsored Ad

Amazon Deals

Seats from a 00 Mustang urgent