Cold Air Intake?

Steeda04SVT · Mar 3, 2011

Anybody have a cold air kit installed on their B2's? If so pics? What brand?

disciplerocks · Mar 3, 2011

I have one on mine. Its called the factory airbox.

Steeda04SVT · Mar 3, 2011

So your rocking out to stock setup. Right on. Anybody else on here with something aftermarket besides stock?

The Jester Race · Mar 3, 2011

http://www.therangerstation.com/tech_library/K_N_airfilter.html

-Jester

sblake01 · Mar 3, 2011

Not exactly a 'cold air' set up because of where the filter is but I have this. It's a Jim Wolf Pop Charger which is actually designed for a 1991 Nissan NX1600 I once owned just happens to fit the Ranger 2.9 MAF sensor.

cammeddrz · Mar 3, 2011

the "brand" is me, i made it all and cut a hole in my hood for the cowl to gather cold air. it is one of the few aftermarket cold air intakes, that actually gather cold air

sblake01 · Mar 3, 2011

That's a considerable stretch of the term 'aftermarket'.

cammeddrz · Mar 3, 2011

sblake01 said:
That's a considerable stretch of the term 'aftermarket'.

at least i'm not stretching the term cold air intake.

i guess it has 2 aftermarket air filters, and 2 aftermarket 4" mandrel bent elbows :icon_twisted:

Surrey · Mar 3, 2011

A Cowl induction snorkel.

Im putting one in my truck this weekend or next.

http://therangerstation.com/tech_library/Snorkel.html

Bronco_Chuck · Mar 3, 2011

this is the one my 84 had on it when i got it from my brother.

as far as i can tell tis just a crappy cone filter from autozone and about 4' of pvc.

sblake01 · Mar 3, 2011

cammeddrz said:
at least i'm not stretching the term cold air intake.

i guess it has 2 aftermarket air filters, and 2 aftermarket 4" mandrel bent elbows

Don't get me wrong. I thinks it's cool. (Note the smiley/icon) No direspect meant. However, if you look at my post you'll see that I'm not claiming mine to be a cold air intake.

cammeddrz · Mar 3, 2011

i never thought you were dis'ing. i got what you meant. i was just commenting on how i didn't do what most guys do and take gauze, clamp-on air filters and put them on their rigs turning what was a stock cold air intake, into a warm air intake that picks up hot under-hood air

Steeda04SVT · Mar 3, 2011

Looks good. I read somewhere that the cold air intake for the Dodge Neons fit the 2.9's as well.

8879ford · Mar 4, 2011

I used a cold air intake pipe ment for a 1990 nissan 240sx...it is the same diamiter pipe as the hole on maf thingy....i did have to cut it down a couple inches, and grind a mounting tab off of it cause it rubbed on the rad. hose....but the pipe basiclly goes right to where the stock box sat behind the batterie

Steeda04SVT · Mar 4, 2011

8879ford said:
I used a cold air intake pipe ment for a 1990 nissan 240sx...it is the same diamiter pipe as the hole on maf thingy....i did have to cut it down a couple inches, and grind a mounting tab off of it cause it rubbed on the rad. hose....but the pipe basiclly goes right to where the stock box sat behind the batterie

Any pics?

Cold Air Intake?

New Member

July 2011 OTOTM Winner

New Member

Well-Known Member

Member

Active Member

Member

Active Member

New Member

Member

Member

Active Member

New Member

New Member

New Member

Sponsored Ad

Sponsored Ad

Today's birthdays

Member & Vendor Upgrades

Truck of The Month

Recently Featured

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store

Sponsored Ad

Sponsored Ad

Sponsored Ad

Amazon Deals