• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

1989 F150 mild restoration build


brinker88

11/2013 OTOM Winner
Supporting Member
OTOTM Winner
Joined
Oct 14, 2010
Messages
3,498
Reaction score
36
Points
0
Location
Williamsport, Pa
Vehicle Year
1993
Make / Model
Ford
Engine Size
4.0L
Transmission
Automatic
I needed a 4x4 truck for the winter while the ranger's under the knife so I started looking for a full size 80-96 Ford truck.

I ended up with an '89 F150. Drivetrain consists of a 5.0, 5 speed, and BW transfer case. I picked it up for $825 out the door. Plans are to fix the body up, do a single stage paint job on it, level the front, Dana 44 TTB 8 lug outers with a Dana 50 4.10 chunk, Disc brake sterling rear, and beef up the rear suspension.

I'm posting here to show my progression throughout my "build".

The truck:



The floors (both sides were like this) :



New sheetmetal installed and sealed with fiberglass bondo:



Interior is in great shape:



So far, I've installed new rough country N2.0 shocks in the rear, fixed the rotted off EGR tube, installed flowmaster muffler and tail pipe, fixed vacuum lines in the engine bay, fixed floorboards, new speakers in the door, fixed radio, fixed speedometer and transfer case linkage, and ordered ball joints.
 


Grunizzle

01/2013 OTOTM Winner
U.S. Military - Active
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
TRS Banner 2010-2011
TRS 20th Anniversary
Joined
Jan 20, 2009
Messages
1,252
Reaction score
3
Points
38
Location
Albuquerque, NM
Vehicle Year
1991
Make / Model
Ford
Engine Size
4.0L V-6
Transmission
Manual
Do you plan on wheeling it? Just curious as to why do the axle upgrades. If your ranger engine ever does you have a 5.0 donor now haha
 

adsm08

Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
Joined
Sep 20, 2009
Messages
34,623
Reaction score
3,613
Points
113
Location
Dillsburg PA
Vehicle Year
1987
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Manual
2WD / 4WD
4WD
Tire Size
31X10.50X15
So you are broke again huh?
 

brinker88

11/2013 OTOM Winner
Supporting Member
OTOTM Winner
Joined
Oct 14, 2010
Messages
3,498
Reaction score
36
Points
0
Location
Williamsport, Pa
Vehicle Year
1993
Make / Model
Ford
Engine Size
4.0L
Transmission
Automatic
Do you plan on wheeling it? Just curious as to why do the axle upgrades. If your ranger engine ever does you have a 5.0 donor now haha
Don't plan on wheeling it ever. I'd like the heavier axles in it because I can :icon_twisted: Plus the 4.10s will be great when hauling which is what the truck will primarily be doing.

And Eric, no. I bought the truck for $825 and sold my little 2wd ranger for $600
 

jhammel85

Guest
Not bad combo with the Stick and v8. Looks like a great beater truck!
 

brinker88

11/2013 OTOM Winner
Supporting Member
OTOTM Winner
Joined
Oct 14, 2010
Messages
3,498
Reaction score
36
Points
0
Location
Williamsport, Pa
Vehicle Year
1993
Make / Model
Ford
Engine Size
4.0L
Transmission
Automatic
Thanks bud. It should serve me well.
 

brinker88

11/2013 OTOM Winner
Supporting Member
OTOTM Winner
Joined
Oct 14, 2010
Messages
3,498
Reaction score
36
Points
0
Location
Williamsport, Pa
Vehicle Year
1993
Make / Model
Ford
Engine Size
4.0L
Transmission
Automatic
No pics, but I changed radius arm bushings in the truck Friday night. Turns out they were still the OEM ones. No wonder the truck would shake and wander all over the highways. Everything's nice and tight now. I reamed out the rivet holes in the frame to 1/2" and slapped some frame bolts in there. $17.00 in parts and 6 hours of my free labor. I absolutely HATE those rivets....
 

MastuhWaffles

11/2014 OTOTM Winner
OTOTM Winner
TRS Banner 2012-2015
Joined
Mar 14, 2013
Messages
1,846
Reaction score
69
Points
48
Location
Texas
Vehicle Year
2007
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0L SOHC
Transmission
Automatic
2WD / 4WD
2WD
Tire Size
31
My credo
I need more sleep.
I loved my 88 F-150. It had the long bed with 2 fuel tanks. Eventually it just got to the point where it was going down the tube. The electronics starting going crazy, it wouldn't shift anymore and then the rust was getting horrible. But for sitting in a field for 6 years, it did good. I actually ended up getting $400 bucks for it.
 

brinker88

11/2013 OTOM Winner
Supporting Member
OTOTM Winner
Joined
Oct 14, 2010
Messages
3,498
Reaction score
36
Points
0
Location
Williamsport, Pa
Vehicle Year
1993
Make / Model
Ford
Engine Size
4.0L
Transmission
Automatic
That's what mine has. New tanks, fuel pumps and straps. This thing still has half the factory "paint" on the frame. Body's going to shit, but that's getting fixed.

Wanted to update this thread. Just did ball joints tonight. Fixed my death wobble AND my brake pulsating problem.
 

country0001

Active Member
TRS Banner 2010-2011
Joined
Dec 10, 2008
Messages
2,512
Reaction score
14
Points
38
Age
49
Location
Stillwater, OK
Vehicle Year
1990,92
Make / Model
Ford,Ford
Engine Size
4.0,5.0
Transmission
Manual
I would kill for the 5 speed. They are super hard to find around here.
 

brinker88

11/2013 OTOM Winner
Supporting Member
OTOTM Winner
Joined
Oct 14, 2010
Messages
3,498
Reaction score
36
Points
0
Location
Williamsport, Pa
Vehicle Year
1993
Make / Model
Ford
Engine Size
4.0L
Transmission
Automatic
Couple updates. Got the new hood, cowl, wiper motor, doors, and passenger fender on the truck. Still need to fix the bed rust and driver side fender.

As I mentioned earlier, the truck is getting a sterling 10.25" rear and D50 third member up front stuffed with 4.10s. I will also be swapping to 8 lug on the TTB D44. I've also decided to put a small 4" lift on it with my radius arms/mounts from my ranger TTB build and they swap over perfectly.

Knuckles how they started:



Knuckles now fitted for large bearing spindles and chevy caliper brackets



^ That hole will be filled with weld from the back of the knuckle.
 

Mudhound

New Member
U.S. Military - Veteran
V8 Engine Swap
Solid Axle Swap
Joined
Aug 3, 2009
Messages
555
Reaction score
2
Points
0
Location
Eaastern Ky- out in the woods ( literally)
Vehicle Year
84
87
Make / Model
Ford
Engine Size
173 and 331 CI
Transmission
Manual
Interesting brake swap on the TTB. Any info on how/why? I can probably guess on the why part, seeing as how my 87 likes to split and then walk out the caliper pins. Stupid design.
 

brinker88

11/2013 OTOM Winner
Supporting Member
OTOTM Winner
Joined
Oct 14, 2010
Messages
3,498
Reaction score
36
Points
0
Location
Williamsport, Pa
Vehicle Year
1993
Make / Model
Ford
Engine Size
4.0L
Transmission
Automatic
Interesting brake swap on the TTB. Any info on how/why? I can probably guess on the why part, seeing as how my 87 likes to split and then walk out the caliper pins. Stupid design.
It is the only possible way that I know of to properly convert a TTB Dana44 to 8 lug.

LINK
 

Mudhound

New Member
U.S. Military - Veteran
V8 Engine Swap
Solid Axle Swap
Joined
Aug 3, 2009
Messages
555
Reaction score
2
Points
0
Location
Eaastern Ky- out in the woods ( literally)
Vehicle Year
84
87
Make / Model
Ford
Engine Size
173 and 331 CI
Transmission
Manual
Okay. So, the GM stuff is simply a "test fit/grind until it fits" thing, right? Stubs are from 10 bolt, then?
 

brinker88

11/2013 OTOM Winner
Supporting Member
OTOTM Winner
Joined
Oct 14, 2010
Messages
3,498
Reaction score
36
Points
0
Location
Williamsport, Pa
Vehicle Year
1993
Make / Model
Ford
Engine Size
4.0L
Transmission
Automatic
Okay. So, the GM stuff is simply a "test fit/grind until it fits" thing, right? Stubs are from 10 bolt, then?
Correct. Make SURE the caliper brackets are 3/4 ton. Ask me how I know. :annoyed: And the stubs can either be 10 bolt or chevy d44.
 

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top