hy35f2t
New Member
- Joined
- Oct 8, 2014
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Transmission
- Automatic
Alright heres the info on the truck. I bought a 88 2.9 2wd ranger dual tanks stock long bed.
The truck didnt have motor or trans when I bought it . The engine harness is missing to. Im putting in a carb v8 but using stock rear tank only, removed the side tank and put in a new sended for rear tank but level still dosent work.
I noticed when I put the key on the on positio. The tach jumps like the cluster is getting pump but not the water temp gauge or fuel level gauge. I also noticed the relay isnt there for the fuel pump on the passanger inner fender. Just the 2 wire plug.
The truck didnt have motor or trans when I bought it . The engine harness is missing to. Im putting in a carb v8 but using stock rear tank only, removed the side tank and put in a new sended for rear tank but level still dosent work.
I noticed when I put the key on the on positio. The tach jumps like the cluster is getting pump but not the water temp gauge or fuel level gauge. I also noticed the relay isnt there for the fuel pump on the passanger inner fender. Just the 2 wire plug.