longboss351
New Member
- Joined
- Apr 21, 2009
- Messages
- 21
- Reaction score
- 0
- Points
- 0
- Transmission
- Automatic
Hi guys, Chris from AZ.
I have a 1988 Ranger STX that I have put Explorer difs front and rear, 3.73 gears and Electric lockers front and rear.Rear disc axle.
Now,,,, I am ready for the 1998 Explorer 5.0 swap, 4R70W trans,Strong box underdrive box and a NP205 transfer case. It is all ready to set in,,,, But I am wondering if anyone would have a wiring diagram for the Main harness plug by the firewall. The pins and what they do? I have been told there are only a few I would need to power the motor and run.. Any help would be great!!
Just so you know this Ranger is a running driving truck with the V6 auto in it. The doner 5.0 was a running driving motor, I got all the eng and trans harness. It is setting on the floor with 1 square plug next to the computer, that is the plug I am needing the wire diagram for, what the pins go to. All my lights, dash, work in the truck. My V6 has a seperate eng harness that will come out with the eng. And the 5.0 has it own also. If anyone knows the pin# what each one goes to please post the it for me.
Thanks for your time,
Chris AZ
I have a 1988 Ranger STX that I have put Explorer difs front and rear, 3.73 gears and Electric lockers front and rear.Rear disc axle.
Now,,,, I am ready for the 1998 Explorer 5.0 swap, 4R70W trans,Strong box underdrive box and a NP205 transfer case. It is all ready to set in,,,, But I am wondering if anyone would have a wiring diagram for the Main harness plug by the firewall. The pins and what they do? I have been told there are only a few I would need to power the motor and run.. Any help would be great!!
Just so you know this Ranger is a running driving truck with the V6 auto in it. The doner 5.0 was a running driving motor, I got all the eng and trans harness. It is setting on the floor with 1 square plug next to the computer, that is the plug I am needing the wire diagram for, what the pins go to. All my lights, dash, work in the truck. My V6 has a seperate eng harness that will come out with the eng. And the 5.0 has it own also. If anyone knows the pin# what each one goes to please post the it for me.
Thanks for your time,
Chris AZ