CarsonChris
New Member
- Joined
- Apr 1, 2011
- Messages
- 168
- Reaction score
- 1
- Points
- 0
- Vehicle Year
- 1990/87
- Make / Model
- Ford
- Engine Size
- 4.0/2.9
- Transmission
- Manual
My BII is an 87 Eddie Bauer. It had California emissions with the EGR. I put a different 2.9 and an FM146 in it. I didn't use the "EGR" manifold. I've removed the egr.
I'm going to be using a computer from an 89BII.
Has anyone else eliminated the EGR by going to the newer computer?
I've noticed a difference in the wiring from the 87 to 89. I have some type of a sensor next to the solenoid that has two vacuum hoses attached to it. What is this? The 89's don't have it. There's also a different air filter box style between the two years. I'm switching air filter boxes tomorrow. The 87 that I have has some type of emissions equipment under the box, also with two vacuum hoses.
If I change the vacuum lines do I also need to change any of the wiring?
I'm going to be using a computer from an 89BII.
Has anyone else eliminated the EGR by going to the newer computer?
I've noticed a difference in the wiring from the 87 to 89. I have some type of a sensor next to the solenoid that has two vacuum hoses attached to it. What is this? The 89's don't have it. There's also a different air filter box style between the two years. I'm switching air filter boxes tomorrow. The 87 that I have has some type of emissions equipment under the box, also with two vacuum hoses.
If I change the vacuum lines do I also need to change any of the wiring?