Welcome Visitor! Please take a few seconds and 
du510
New Member
- Joined
- Aug 21, 2007
- Messages
- 332
- Reaction score
- 0
- Points
- 0
- Location
- Stuck between NYC & Boston
- Vehicle Year
- 1994
- Make / Model
- MAZDA
- Transmission
- Manual
So I've got 6" of suspension lift in front, so I figure I ought to get some longer sway bar end links. Naturally, I went with Skyjacker (Part # SBE734-L).
I got them today, no worries.... but I put it side by side with the stockers, and its only about an inch or two longer? I was expecting some serious difference in length.
I went on the SJ site to doublecheck, and I did get the right part, they describe it as follows:
Thanks in advance.
I got them today, no worries.... but I put it side by side with the stockers, and its only about an inch or two longer? I was expecting some serious difference in length.
I went on the SJ site to doublecheck, and I did get the right part, they describe it as follows:
Is there something I am missing here? When going from a stock height to 6" taller, why are the end links only 1-2 inches longer???
Thanks in advance.
