Welcome Visitor! Please take a few seconds and bacardi4me
New Member
- Joined
- Sep 18, 2008
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 2001
- Make / Model
- Ford
- Transmission
- Manual
I have a 2201 Ford Ranger 4x4, clutch went out, No pressure goes right to floor.
I replaced the Slave Drive and still nothing. I bought a Clutch Kit and replaced clutch and Pressure Plate, still nothing.
What else could be the problem? I have worked on this truck for 4 days now and can't figure this out and I need to get this truck on the road as I am missing work.
There is just no pressure when clutch is pressed, could this be a problem with bleeding it? I have read allot of people have problems with that.
Everything else seems fine and should be working properly.
Any advice would greatrly be appreciated.
I replaced the Slave Drive and still nothing. I bought a Clutch Kit and replaced clutch and Pressure Plate, still nothing.
What else could be the problem? I have worked on this truck for 4 days now and can't figure this out and I need to get this truck on the road as I am missing work.
There is just no pressure when clutch is pressed, could this be a problem with bleeding it? I have read allot of people have problems with that.
Everything else seems fine and should be working properly.
Any advice would greatrly be appreciated.
