Bronco II Dana 44/ Ford 9" Swap

kiethtyrrell · Jun 29, 2011

I recently started a swap on my 84 bronco II. Taking out the old dana 35 TTB and putting in an early bronco dana 44/ ford 9".

Here is how it all started out.. (Stock)

Eventually added a 3" suspension lift, 3" body lift and 35" tires.

This is when we took off the TTB..

Here are the brand new buckets and track bar bracket from james duff and track bar from bronco graveyard..

Here are the buckets on my bronco..

Here is the dana 44 under my bronco, almost all the way mounted..

We built a custom transmission crossmember..

Here the dana 44 is on. I just got new 6" leaf springs and I am planning on getting new low rate coil springs..

dangerranger83 · Jun 29, 2011

Now its bad ass, looks nice. Did you put upgraded shafts in the front with the bigger ujoints?

I did notice in the second picture of it being stock that the rear wheel is off the ground, safe to say it didnt have much flex then.

I also see that you put a 4.0 in her too.

chrwilkins30 · Jun 29, 2011

Lovin it. Body is so clean.

jhammel85 · Jun 29, 2011

That truck looks great! I love the combo of the lift that you've gone with.

Oh and definitely loving the original paint with the decals. I love it. ( that combo it reminds me of my brothers old suzuki 3 wheelers from when I was a kid)

dangerranger83 · Jun 29, 2011

Now lets see some wheeling pics of her!!!!

kiethtyrrell · Jun 29, 2011

i dont have bigger u joints or shafts but it has 4.11s and a power locker in it. with disk breaks as well. the rear has 4.11s and a detroit. thanks for all the complements! more work is going to be done. i need to do the rear end and put on the 6 in skyjacker springs on!
i also don't have enough clearance between the engine crossmember and the third member so i will be changing something. bigger springs or cut up the crossmember?

88_Eddie · Jun 29, 2011

damn it, stupid work internet wont let me look at the pics

The Mud Addict · Jun 29, 2011

Trim and reinforce the engine crossmember :icon_welder:

And VERY nice B2 :icon_hornsup:

88_Eddie · Jun 30, 2011

i can see the pics now! looks f-ing sweet!

BlackBII · Jun 30, 2011

Looks awesome man! I love the yellow and brown paint job.

Do you have a 4.0 in it?

dangerranger83 · Jun 30, 2011

His info says he has a 4.0 plus in the pics. I can see the oil pan.

kiethtyrrell · Jun 30, 2011

yeah it has a 4.0! i have had the 4.0 in for about a year now and i love it! has great power and starts up every time! thanks for all the compliments all of your rigs look great as well!

dangerranger83 · Jul 1, 2011

I want a 4.0 but damn do I love how I can beat on my 2.8 and it not give up or flinch on me, just keeps going.

kiethtyrrell · Jul 1, 2011

yeah i was hard on my 2.8 as well and it never blow up! i just dident have enough power and it liked to eat oil. also i bought the ranger with the 4.0 for 100 bucks and all that was wrong with it was the vacuum modulate on the transmission was bad. so i bought it and swapped the engine trany and running gear then scraped the truck for more then i got it for! :icon_thumby:

disciplerocks · Jul 1, 2011

Looks damn good sir.

Bronco II Dana 44/ Ford 9" Swap

New Member

5.0 HO under the hood!!!

New Member

jhammel85

Guest

5.0 HO under the hood!!!

New Member

Well-Known Member

Member

Well-Known Member

Ranger Custom

5.0 HO under the hood!!!

New Member

5.0 HO under the hood!!!

New Member

July 2011 OTOTM Winner

Sponsored Ad

Sponsored Ad

Today's birthdays

Member & Vendor Upgrades

Truck of The Month

Recently Featured

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store

Sponsored Ad

Sponsored Ad

Sponsored Ad

Amazon Deals