• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Problem wiring new fog lights.


Shinoda

New Member
Joined
Oct 7, 2017
Messages
6
Reaction score
0
Points
0
Transmission
Automatic
Hey all,

I'm having a weird issue wiring up new fog lights on my 93 Splash. I bought a kit that includes all new wiring and a relay. I wired up the switch in the cab and it was working fine(illuminated). I then ran new power and ground to each new fog light. I had it working for a bit and then something happened. Now, the only way I can get the fog lights to turn on is if I ground the relay, then ground the light to the relay ground that is touching the chassis ground and pull them both off the chassis ground. If I ground the light to the same spot the relay is grounded it won't light up only if it's touching the connector on the relay ground and pull them both off the chassis ground together. Once the Relay ground and light ground are separated from the chassis ground then it turns off.

The relay clicks when I just ground the relay but not if the light and relay are grounded. The light on the switch in the cab no longer illuminates but still seems to work. I hope this makes sense.
 

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top