• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Another 4.0 ohv to 4.0 SOHC swap question


dsm21

New Member
Joined
Jul 31, 2013
Messages
36
Reaction score
0
Points
0
Vehicle Year
1999
Make / Model
Ford
Transmission
Automatic
Hey guys I am considering swapping out my 4.0 ohv (Blown head gasket) for a 4.0 SOHC.
I have a 99 XLT 4X4.

I have been researching this and I know it has been done usually on older trucks late 80s early 90s with different model year engines....

But my question is If I got a hold of a 99 Explorer 4.0 sohc engine could I just drop it in without doing any real modifications???

I heard of guys use a sohc on a ohv computer :shok:

I also stumbled across this thread. (FIrst post)
http://www.explorerforum.com/forums/showthread.php?t=331549
Any and all help is welcomed. Thanks
 


snoranger

Professional money waster
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
RBV's on Boost
ASE Certified Tech
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Nov 25, 2007
Messages
13,053
Reaction score
13,526
Points
113
Location
Jackson, NJ
Vehicle Year
'79,'94,'02,'23
Make / Model
All Fords
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
My credo
I didn't ask for your life story, just answer the question!
I heard of guys use a sohc on a ohv computer :shok:
Been there... Done that. I wouldnt go that route... Use the correct computer and harness, it will make your life a lot easier.

As far as bolting it in, everything should bolt up fine since the front half of the trucks are virtually identical.
 

dsm21

New Member
Joined
Jul 31, 2013
Messages
36
Reaction score
0
Points
0
Vehicle Year
1999
Make / Model
Ford
Transmission
Automatic
Been there... Done that. I wouldnt go that route... Use the correct computer and harness, it will make your life a lot easier.

As far as bolting it in, everything should bolt up fine since the front half of the trucks are virtually identical.
The expert himself!!! :yahoo:

Thanks bud for anserwing my question, probably gets annoying after hearing it so much.

I do have another question though with the new ecu / computer will the other harnesses plug in the new computer and work correctly? :icon_confused:

Also what years would best work for a direct plug and play? 99 would be the ideal correct?
 
Last edited:

snoranger

Professional money waster
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
RBV's on Boost
ASE Certified Tech
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Nov 25, 2007
Messages
13,053
Reaction score
13,526
Points
113
Location
Jackson, NJ
Vehicle Year
'79,'94,'02,'23
Make / Model
All Fords
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
My credo
I didn't ask for your life story, just answer the question!
I don't think you'll find a plug and play computer harness, I could be wrong though. The wiring may need to be modified some, but should be close. I'd look for a 98-00 SOHC and take everything from the fan to the y-pipe, Air cleaner to motor mounts. Just pick up the Ford EVTMs (search eBay) for both the donor and recipient vehicles, you'll have everything you need to rewire it to work.

The engine harness may even have different plugs on it then the body harness... If you have to cut and splice wires, solder and heat shrink is the only way to make a permanent connection that will last in the engine compartment.
 
Last edited:

dsm21

New Member
Joined
Jul 31, 2013
Messages
36
Reaction score
0
Points
0
Vehicle Year
1999
Make / Model
Ford
Transmission
Automatic
Wait if I got the SOHC engine, harness and computer what would need to be spliced??
 

snoranger

Professional money waster
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
RBV's on Boost
ASE Certified Tech
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Nov 25, 2007
Messages
13,053
Reaction score
13,526
Points
113
Location
Jackson, NJ
Vehicle Year
'79,'94,'02,'23
Make / Model
All Fords
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
My credo
I didn't ask for your life story, just answer the question!
Wait if I got the SOHC engine, harness and computer what would need to be spliced??
I'm assuming that some of the connections between the body harness and the engine harness may not be the same. I may be wrong and it might just be plug and play... But never assume Ford made it that easy for you. (If there are any differences, it shouldn't be much.)
 

dsm21

New Member
Joined
Jul 31, 2013
Messages
36
Reaction score
0
Points
0
Vehicle Year
1999
Make / Model
Ford
Transmission
Automatic
I'm assuming that some of the connections between the body harness and the engine harness may not be the same. I may be wrong and it might just be plug and play... But never assume Ford made it that easy for you. (If there are any differences, it shouldn't be much.)
Thanks bud, I actually just learned how to sauder yesterday :headbang:
So I thik I can definatelly do this swap.
 

snoranger

Professional money waster
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
RBV's on Boost
ASE Certified Tech
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Nov 25, 2007
Messages
13,053
Reaction score
13,526
Points
113
Location
Jackson, NJ
Vehicle Year
'79,'94,'02,'23
Make / Model
All Fords
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
My credo
I didn't ask for your life story, just answer the question!
Thanks bud, I actually just learned how to sauder yesterday :headbang:
So I thik I can definatelly do this swap.
Good... the next step is to learn how to spell solder. :thefinger:


The swap shouldnt be too hard.

Make sure you get the powersteering hose.. Thats different between the motors. (I also found that the steering cooler was different, but that might be a model year difference, not engine.)

The Y-pipe was different. They looked the same but were off by about 2".

The tranny should be the same.

Any vacuum line that goes to the body should be the same.

The A/C hoses are different.

The fan, rad hoses, shroud are all the same.
 

stmitch

March 2011 STOTM Winner
MTOTM Winner
2011 Truck of The Year
Joined
Jan 29, 2010
Messages
2,259
Reaction score
615
Points
113
Location
Central Indiana
Vehicle Year
2000
Make / Model
Ford
Engine Size
3.0
Transmission
Manual
Why the SOHC?
 

snoranger

Professional money waster
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
RBV's on Boost
ASE Certified Tech
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Nov 25, 2007
Messages
13,053
Reaction score
13,526
Points
113
Location
Jackson, NJ
Vehicle Year
'79,'94,'02,'23
Make / Model
All Fords
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
My credo
I didn't ask for your life story, just answer the question!

dsm21

New Member
Joined
Jul 31, 2013
Messages
36
Reaction score
0
Points
0
Vehicle Year
1999
Make / Model
Ford
Transmission
Automatic
Good... the next step is to learn how to spell solder. :thefinger:
Will do :icon_cheers:

Why the SOHC?

I honestly just want more horsepower Correct me if I am wrong because I have only be researching the engine for about a week or two. But the OHV engine has 160 hp and the SOHC has a little over 200.
I plan on hauling cars and from what I read the sohc engine has higher hp and high torque overal except under 1500 rpms or so the the ohv has a little more torque.

I am think about just putting a new head gasket on there and call it a day, because I am really concerned about the timing chains :icon_surprised:

Snow Ranger you have a ton of experience with these motors what is your opinion?
 

snoranger

Professional money waster
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
RBV's on Boost
ASE Certified Tech
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Nov 25, 2007
Messages
13,053
Reaction score
13,526
Points
113
Location
Jackson, NJ
Vehicle Year
'79,'94,'02,'23
Make / Model
All Fords
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
My credo
I didn't ask for your life story, just answer the question!
Snow Ranger you have a ton of experience with these motors what is your opinion?
They feel about the same under 3000-3500 rpm. Unless you drive like me (aggressive, to say the least), you'll never notice the difference.
 

dsm21

New Member
Joined
Jul 31, 2013
Messages
36
Reaction score
0
Points
0
Vehicle Year
1999
Make / Model
Ford
Transmission
Automatic
They feel about the same under 3000-3500 rpm. Unless you drive like me (aggressive, to say the least), you'll never notice the difference.
I guess you didn't read my intro thread or no what a dsm is. I have a 95 Mitsubishi GSX Turbo All wheel drive. Pulling down about 240/250

So yeah I do drive a little agressive :icon_cheers:
 

snoranger

Professional money waster
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
RBV's on Boost
ASE Certified Tech
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Nov 25, 2007
Messages
13,053
Reaction score
13,526
Points
113
Location
Jackson, NJ
Vehicle Year
'79,'94,'02,'23
Make / Model
All Fords
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
My credo
I didn't ask for your life story, just answer the question!
I guess you didn't read my intro thread or no what a dsm is. I have a 95 Mitsubishi GSX Turbo All wheel drive. Pulling down about 240/250

So yeah I do drive a little agressive :icon_cheers:
I know what a DSM is. I own a Cobra... I've seen quite a few DSMs get smaller and smaller and smaller and smaller in my rear view mirror.:icon_rofl:
 
Last edited:

adsm08

Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
Joined
Sep 20, 2009
Messages
34,623
Reaction score
3,613
Points
113
Location
Dillsburg PA
Vehicle Year
1987
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Manual
2WD / 4WD
4WD
Tire Size
31X10.50X15
I guess you didn't read my intro thread or no what a dsm is.
Oh, smackdown fail.

No, Know. Gotta use the right one man.
 
Last edited:

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top