Welcome Visitor! Please take a few seconds and jarfly
New Member
- Joined
- Oct 7, 2007
- Messages
- 729
- Reaction score
- 1
- Points
- 0
- Age
- 33
- Vehicle Year
- 1987
- Make / Model
- ford
- Transmission
- Manual
Okey after bulidin my 97 4x4, I got some junk left over and i'm all ready itching for another project. People say it's a sickness but oh well.
So heres the rundown; 98 chassis, 3.0 5spd, or a 4.0. If I can find a dash harness and trans.
Okey here the kicker. I wanna use a 80's cab,(yes I have a few first gens).
So It got me thinking on mounting the cab and bed. Well why not body it and use just the frount clip from the 98 with 2x3 back, or 3x3 have't dont my research yet.
Or cut the floor outa the 98 and make filler panles and do a regular body drop.
Rest of it I pretty well have thought out, Oh and what is there to look for usein a 2wd aarm frount end to get to lay?
So heres the rundown; 98 chassis, 3.0 5spd, or a 4.0. If I can find a dash harness and trans.
Okey here the kicker. I wanna use a 80's cab,(yes I have a few first gens).
So It got me thinking on mounting the cab and bed. Well why not body it and use just the frount clip from the 98 with 2x3 back, or 3x3 have't dont my research yet.
Or cut the floor outa the 98 and make filler panles and do a regular body drop.
Rest of it I pretty well have thought out, Oh and what is there to look for usein a 2wd aarm frount end to get to lay?
