That Baker Guy
Member
- Joined
- Mar 23, 2009
- Messages
- 866
- Reaction score
- 17
- Points
- 18
- Location
- mississippi
- Vehicle Year
- 1993
- Make / Model
- Ford
- Engine Size
- v6 3.0
- Transmission
- Automatic
So this may be better suited for a different section but here it goes.
I'm doing the ball joints in a couple weeks and thought i'd take the opportunity to throw in some leveling coils while im in there.
The rough country coils are ~$100 on ebay and the adjustable camber bushings arent too expensive but I want to make sure i'm getting the right ones.
According to the tech articles they're pretty easy to install but what p/n's do i need?
http://www.therangerstation.com/tech_library/Alignment.shtml
The Moog K8986 bushings go from +- 2 1/4 degrees but is that enough?
any direction would help. I read through the sticky but It wasnt too clear for the 2wd's.
I'm doing the ball joints in a couple weeks and thought i'd take the opportunity to throw in some leveling coils while im in there.
The rough country coils are ~$100 on ebay and the adjustable camber bushings arent too expensive but I want to make sure i'm getting the right ones.
According to the tech articles they're pretty easy to install but what p/n's do i need?
http://www.therangerstation.com/tech_library/Alignment.shtml
The Moog K8986 bushings go from +- 2 1/4 degrees but is that enough?
any direction would help. I read through the sticky but It wasnt too clear for the 2wd's.