Welcome Visitor! Please take a few seconds and - Joined
- Aug 8, 2007
- Messages
- 67
- Reaction score
- 0
- Points
- 6
- Age
- 70
- Location
- Freedom N.Y.
- Vehicle Year
- 1992 4.0
- Make / Model
- FORD
- Engine Type
- 4.0 V6
- Engine Size
- 4.0 Plan on 302
- Transmission
- Manual
- 2WD / 4WD
- 4WD
- Total Lift
- 15”
- Tire Size
- 35/12.5/15
I'm going to be using an older 302 with 28oz. Balance and the tranny is as M50D-R2 with the hydraulic clutch. Should I use the clutch plate and pressure plate for the older setup or the newer like say 90-92 ? Don't know if the older clutch and pressure plate would work with hyd. Clutch setup.
